Scrolling The Theaterwide® Picture; And 3 Only); Using The Auto Aspect Ratio Feature - Toshiba Regza42RV535U Owner's Manual

Scrolling the TheaterWide® picture
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide
2 and TheaterWide 3 modes for each input.
To set the scroll settings:
1
Press
M~U
and open the Video menu.
2
Highlight Theater Settings and press @.
TheaterLock
rt
Off ';
3
In the Picture Size field, select either TheaterWide
2 or TheaterWide 3 (you cannot scroll in any other
mode).
4
Press T to highlight the Picture Scroll field.
S
Press .... or ~ to scroll the picture up and down as
needed, from -10 to +20.
6
To save the new settings, highlight Done and press
@.
To revert to the factory defaults, highlight Reset and
press@.
I 42
Using the auto aspect ratio feature
When the auto aspect ratio feature is set to On, the TV
will automatically select the picture size when one of the
following input sources is received:
• A 480i, 480p, 720p, 1080i digital signal from the ANTI
CABLE input
• A 480i signal from the Video 1 or Video 2 input
• A 480i signal from the ColorStream HD1 or HD2 input
• A 480i, 480p, 720p, 1080i, 1080p, or VGA (60/72/
75Hz) signal from the HDMI1I2/3/4 input
Note: The auto aspect ratio feature is not applicable to the PC
input.
To turn on the auto aspect ratio feature:
1
From the Video menu, highlight Theater Settings
and press@.
2
In the Auto Aspect Ratio field, select On.
3
To save the new settings, highlight Done and press
@.
To revert to the factory defaults, highlight Reset and
press@.
To turn off the auto aspect ratio feature:
Select Off in step 2 above.