Chapter 5: Using The Tv's Features; Selecting The Video Input Source To View; Labeling The Video Input Sources - Toshiba TheaterWide 26HL66 User Manual

Selecting the video input source
to view
To select the video input source to view:
1
Press + on the remote control or INPUT on the TV
control panel.
2
To select the input:
Press 0–6 to select the input source you want to view:
a) You can select the video input which will depend on the
input terminals you used to connect your devices (see
Installation Guide).
The current signal source displays in the top right corner
of the Input Selection screen.
Input Selection
0 ANT 1 ANT 1
1 Video 1
2 Video 2
3 ColorStream HD1
4 ColorStream HD2
5 HDMI
6
PC
0 - 6 /
b) Repeatedly press Bb on the remote control (or
CHANNEL Bb on the control panel) to change the
input; or
c) Repeatedly press + on the remote control or INPUT
on the TV control panel to change the input.
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(- "Labeling the video input sources" at right).
• The source can be "hidden" (- "Labeling the video input
sources" at right).
22

Chapter 5: Using the TV's features

ANT 1
INPUT to Select

Labeling the video input sources

You can label each video input source according to the type of
device you connected to each source, from the following preset
list of labels:
– – (default label)
•
Cable
•
DTV
•
Satellite/DSS
•
VCR
•
Laser Disk
•
DVD
•
HD DVD
•
Audio Receiver
•
Compact Disc
•
Video Recorder
•
Game Console
•
Hide (to hide an unused input in the Input Selection
•
screen)
Note: If you select PC in the Input Selection screen, you can
choose only "– –," "Hide," or "Game Console" as the label.
To label the video input sources:
1
Press Y and open the Preferences menu.
2
Highlight Input Labeling and press T.
3
Press B or b to highlight the video source you want to
label.
Preferences
Favorite Channels
Closed Caption Mode
Closed Caption Advanced
Input Labeling
Menu Language
Channel Browser Setup
Navigate ENTER Select
Input Labeling
Video 1
Video 2
ColorStream HD 1
ColorStream HD 2
HDMI
PC
Reset
4
Press C or c to select the desired label for that input
source. If a particular input is not used, you can select
Hide as the label, which will cause that input to be
"grayed out" in the Input Selection screen and skipped
over when you press + on the remote control.
5
To save the new input labels, highlight Done and press
T.
To revert to the factory default labels, highlight Reset
and press T.
Off
English
CH RTN Back EXIT Exit
DVD
Cable
Video Recorder
Hide
DTV
- -
Done