Mitel Border Gateway (Mbg) Support; Support For New Sip Phones; Alarms/Alerts Via E-Mail; Mitel Uc 360 Collaboration Point Support - Mitel MiVoice Office 250 Installation And Administration Manual
Hide thumbs
Also See for MiVoice Office 250:
- User manual (129 pages) ,
- Administration manual (85 pages) ,
- Manual book (63 pages)
Table of Contents
Advertisement
MiVoice Office 250 Installation and Administration Guide
Mitel Border Gateway (MBG) Support
53xx series IP phones for Teleworker operation are now supported when an MBG is connected to
a Mitel 5000 CP. See "Mitel Border Gateway (MBG) Connectivity" on
Support for new SIP Phones
Mitel 5603/5604/5607 SIP phones are now supported. Ad-Hoc Conferencing using these new SIP
phones is also supported.
Alarms/Alerts via E-mail
This new feature in SysAd adds the ability to program user notification for alarms. Users are created
and managed in DB Programming, as is their notification destination (e-mail, text message, etc.).
In SysAd the alarms can be enabled or disabled of notification on a per user and individual alarm
and/or alarm group basis.
Mitel UC 360 Collaboration Point Support
The 5000 CP supports the Mitel UC360 Collaboration Point, and it is programmed as a SIP device.
Details are included in the MiVoice Office 250 Features and Programming Guide.
UVM E-Mail Sync with Gmail and Office 365
The UVM application provides integration and synchronization capabilities between an user's voice
mailbox and their e-mail client application and is referred to as E-Mail Synchronization. It currently
has the ability to synchronize with e-mail using IMAP with Exchange, Lotus Notes and Groupwise.
With the popularity of hosted e-mail providers, the purpose of this enhancement is to extend the
capabilities to include Gmail and Office 365.
See the MItel 5000 Communications Platform Unified Voice Messaging E-Mail Sychronization
Adminitrator Guide for details.
DTMF Payload Type 101
DTMF payload type 101 (one of the most common and preferred standards in SIP calls) is now
supported.
Combination of Inactivity Timers
System Administration & Diagnostics and Database Programming now use the same timer for
inactivity. The timer is programmed in the Options window on the Advanced Tab in System
Administration & Diagnostics.
24
page 44
for details.
Advertisement
Table of Contents
Troubleshooting
