62
Getting Started
Adding memory (optional)
Do not force the memory module into position. The memory
module should be completely inserted into the socket and
level when secured in place.
The clips on either side of the memory module snap into place
when the memory module is properly inserted.
14
Replace the memory slot cover and tighten the screw.
15
Re-insert the main battery. For more information on
inserting the main battery, see
battery" on page
16
Turn the computer right side up.
17
Reconnect the cables.
18
Restart the computer.
You can now continue setting up the computer. When the
operating system has loaded, you can verify that the
computer has recognized the additional memory module.
If you are adding an extra memory module after setting up the
computer, verify that the computer has recognized it correctly
as described in
Removing a memory module
If you need to remove a memory module:
1
Complete steps
page 57
module slot cover.
130.
TECHNICAL NOTE: You must have at least one memory
module installed for the computer to work.
"Checking total memory" on page
1–8
to shut down the computer and open the memory
"Inserting a charged
in
"Installing a memory module" on
64.