Inserting A Compact Disc - Toshiba M2 User Manual

110
Learning the Basics
Using the DVD-ROM or multi-function drive
Eject button—Releases the disc tray when the system is
powered on.
Manual eject hole—Releases the disc tray when the power is
off. Use a straightened paper clip or other narrow object to
press the manual eject button located inside the hole.

Inserting a compact disc

To insert a compact disc into the DVD-ROM or multi-
function drive:
1 Make sure the computer is turned on.
2 Make sure the in-use indicator light is off.
3 Press the DVD-ROM or multi-function drive's eject
button.
The disc tray slides partially out of the drive (about 1 inch).
Do not press the Eject button or turn off the computer while the
Drive in-use indicator light is glowing. Doing so could
damage the disc or the drive.
When the disc tray is open, be careful not to touch the lens or
the area around it. Doing so could cause the drive to
malfunction.
Never use a pencil to press the Eject button. Pencil lead can
break off inside the computer and damage it.
Before using headphones to listen to an audio CD, turn the
volume dial down. Playing the CD with the volume set too
high could damage your ears.