Toshiba M2 User Manual page 73

Removing the sample memory module cover
6 If a memory module exists in the slot, remove it as
detailed in
secondary slot" on page
in the slot, proceed to
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector on the side you insert into the
computer.
7 Remove the new memory module from its antistatic
packaging.
8 Holding the memory module at an angle by its edges so
that the gold connector bar faces the slot, fit the module
into the socket.
9 Gently press down on the memory module until the clips
snap into place.
Do not force the module into position. The memory module
should be level when secured in place.
Connecting Other External Devices
"Removing a memory module from the
74. If no memory module exists
step
Adding memory
7.
73