Associating V300 Camera With A Recording Group; Assigning A Configuration And Officer And Checking Out - Motorola V300 User Manual

Docking the V300 Camera
Associating V300 Camera with a
Recording Group
When you dock your V300 in a WiFi base, the camera pairs with the base. This pairing allows the
camera to associate with the local recording group
and (if present) the 4RE DVR. A recording group is typically associated with a vehicle.
Note: You can pair multiple cameras with the same WiFi base. You cannot pair
with VISTA cameras.
Assigning a Configuration and
Officer and Checking Out
Important! Before using the camera for the first time, fully charge and assign a
configuration and officer to the camera.
Depending on how your agency assigns its cameras, you may need to configure and assign the
camera each time it is checked out.
To configure the camera:
1. Dock the camera in the WiFi base or Transfer Station II connected to a computer with access to
the Evidence Library (EL).
2. Create and then assign a configuration and an officer to the docked camera using EL.
Caution: If you have the battery with attached camera docked, ensure that you
remove them together. Undocking one without the other can damage your data.
As a configuration is applied to the camera, the display shows CONFIG. The configuration update
alert sounds when the update is finished. The camera vibrates when the update completes.
34
(page 45) that includes other V300 Cameras
V300 Body-Worn Camera User Guide
WGD00169 Revision C