Power Off; Forcing Power Off - Motorola V300 User Manual

Power off

To power off the camera:
Press and release the Power button.
n
The camera prompts you to press the Power button again.
After you press the Power button the second time, the screen shows SHUTTING DOWN and the
green LED turns off. Descending tones sound (depending on your configuration).

Forcing power off

Warning! Avoid forcing the V300 to power off. Forcing the camera to power off can
result in data corruption.
If the V300 stops responding to commands (or if Technical Services instructs you to), remove the
battery to force the camera to power off.
If you force the camera to power off, the V300 may show System Recovery on the screen at the
next boot. Allow the camera up to 10 minutes to complete the storage verification process.
V300 Body-Worn Camera User Guide
WGD00169 Revision C
Power off
23