Docking The V300 Overview - Motorola V300 User Manual

Docking the V300 Camera

Docking the V300 Overview

Dock the V300 to recharge the battery, upload evidence, and update firmware. You can dock the
V300 from:
WiFi base (charge and upload from)
l
Transfer Station II (charge and upload from)
l
USB base (charge only)
l
Note: The camera and battery can only dock in one direction on the bases. Do not
remove the camera from the battery while charging. You can damage files on the
camera.
You can dock the V300 Camera with the battery or dock the stand-alone battery in any of the
available bases. Use the WiFi base for incidental charging during your shift. Charging in a vehicle
base (WiFi or USB), without the vehicle running, can impact the vehicle battery and can slow
charging in warmer temperatures.
Caution: If the ambient temperature gets too hot (40° C / 104° F) the battery may
stop charging.
While docked, you can:
Charge the battery
l
Upgrade firmware for the V300 Camera from Transfer Station II
l
Upload recorded events from Transfer Station II
l
Upload recorded events from the WiFi base and watch the progress on the 4RE
l
Define a Record-After-the-Fact
l
Request a state capture from Transfer Station II for troubleshooting
l
Upgrade the camera software (Transfer Station II only)
l
Note: The V300 must interact with Evidence Library (EL) to be customized for your
agency. For that interaction to take place, the camera must be docked in a Transfer
Station II or a WiFi base with access to EL.
30
(page 32)
(page 31)
®
(RATF) event
V300 Body-Worn Camera User Guide
WGD00169 Revision C