Motorola V300 User Manual page 38

Docking the V300 Camera
To upgrade the V300 firmware:
1. Dock the camera in a WiFi base or Transfer Station II with access to EL.
If an upgrade is needed, EL notices and pushes the upgrade automatically.
V300 checks EL for firmware upgrades.
2. Keep the camera docked while upgrading.
Warning! DO NOT REMOVE the camera from the dock while its new firmware is
being applied. Removing the camera from the dock during the upgrade can cause
the camera to stop functioning. The camera cannot perform any other function,
including uploading video, while it is upgrading its firmware.
While the upgrade is being staged on the camera, the LCD display shows
DO NOT INTERRUPT under the upgrade bar. Do not undock or disturb the camera.
When the upgrade has finished applying, the camera sounds the ready alert (depending on your
alert notification selections). You can safely undock the camera.
38
V300 Body-Worn Camera User Guide
WGD00169 Revision C