Leds For Wifi Base; Left Led; Right Led - Motorola V300 User Manual

About the Features of the V300 Camera

LEDs for WiFi base

Two LEDs on the front of the WiFi base show power connection status. The LEDs are light-
sensitive and adjust to the ambient light.

Left LED

LED State
No light
Red Solid
Red Blinking
Red Blinking
Green Solid
Green Blinking
The left LED on the WiFi base blinks green when it successfully pairs with a V300. The LED
blinks red if the pairing was not successful.
Note: If you get a solid red light, try undocking and redocking your camera and
battery. If solid red appears repeatably, contact Customer Service.

Right LED

LED state State
Off
Amber Solid
Amber Blinking
Green Solid
Green Blinking
If two cameras are paired with the same WiFi base, and one is docked, the WiFi base LEDs show
the state of the docked camera.
64
WiFi base state
Powered off
Charge error
Error condition
Pairing not successful
Error condition
Fully charged
In shutdown or wireless upload timeout period
WiFi base state
Connected to Distributed Multi-Peer Recording
upload server (EL)
Not connected to camera or upload server
Activity with upload server (EL)
Connected to camera (Wi-Fi connection)
Activity with camera (Wi-Fi connection)
V300 Body-Worn Camera User Guide
WGD00169 Revision C