Table of Contents
Advertisement
3.2
User Account and Camera Setup on Android™ Devices
What you need
Wi-Fi ® Camera Unit
•
•
Power adapter for the Camera
•
Device with Android™ system version 4.4.2 and above
3.2.1
Power ON and Connect the Camera
•
Connect the power adapter to an electrical outlet and insert the plug into
the micro USB socket on the side of the Camera Unit.
•
During the start-up sequence the camera will pan from left to right and stop
in the parked position. You will hear a voice prompt "Your camera is now
starting". (This will take approximately 30 seconds.)
•
The Camera's Red LED Flashes after the Camera has finished booting.
3.2.2
Download Hubble for Motorola Monitors App
•
Go to Google Play™ Store to search for "Hubble for Motorola Monitors".
•
Download "Hubble for Motorola Monitors" App from Google Play™ Store
and install it on your Android™ device
3.2.3
Run Hubble for Motorola Monitors App on Android™ device
Ensure that your Android™ device is connected to your Wi-Fi ® router.
•
•
Run "Hubble for Motorola Monitors" App, enter your account information,
read through the Terms of Service, then select "By signing up you agree to
our Terms & Conditions" before you tap SIGNUP. (Picture A1)
Getting started - Connecting Devices
9
Advertisement
Table of Contents
