Updating Your Tv Via Dvb-T/T2; C/S* /S2; Getting Update Information - Sharp AQUOS LC-70LE741E Operation Manual

Appendix

Updating your TV via DVB-T/T2*

2 2
C/S* /S2*
Ensure that your TV software version is always up to
date. From time to time SHARP will make updated
TV base software and DVB software available.
I 741 series only
J 740 series only
View setting
Download setup
Go to "HOME" > "TV Menu" > "Setup" > "View
setting" > "Individual setting" > "Standby
search" > "Download setup".
Searching for updates*
* All countries except UK, Sweden, Finland and Italy are
set to "No" for this function.
The TV automatically determines whether a new
software version is available when the TV is in
standby mode.
Item
Automatically searches for new
software updates available when the
Yes
TV is in standby mode.
Does not search for update
No
information.
Checks if there is new software
Now
immediately.
1
/
Downloading the software
You can select the method of update.
If the software is updated, the confirmation
1
message "New download information has been
detected." appears.*
• If the TV receives the update service while in
standby mode, a confirmation message displays
after turning on the power.
* When the download is available only at a later time,
a confirmation message regarding the scheduled
date and time to start downloading from a TV
station will be displayed. Download information
may be displayed together with the confirmation
message.
Follow the screen prompts.
2
Starts downloading immediately.*
It takes approximately one hour to
update. You cannot carry out other
operations while downloading.
Yes
• Cancels the download by pressing
; on the remote control unit when
"Discontinue" is displayed on the
screen during the update.
Does not perform downloading.
No
* The download will start at the date and time for the
scheduled download. Turn on the power of the TV
before the scheduled time for downloading or keep it in
standby mode.
NOTE
• Updating the software may take some time.

Getting update information

When new software is detected, you can confirm the
update information and download the software from
"Message list".
NOTE
• When the TV succeeds at downloading new software,
• The software update will not be carried out if there is no
Item
Display reports regarding failures and changes for
timer settings.
You can check the TV ID on the screen for reporting
to customer service.
68
Information
Message list
Go to "HOME" > "TV Menu" > "Setup" >
"Information" > "Message list".
the message is updated in the "Message list" of the
"Information" menu.
new software available at the specified download time.
Information
Receiver report
Go to "HOME" > "TV Menu" > "Setup" >
"Information" > "Receiver report".
Information
Identification
Go to "HOME" > "TV Menu" > "Setup" >
"Information" > "Identification".