Teletext - Sharp AQUOS LC-70LE741E Operation Manual

Watching TV
Timer setup using EPG
The TV can be switched to a programme or start
recording for time shift at the set time.
Press EPG.
1
Press a/b/c/d to select the programme you
2
want to set, and then press ;.
Back to EPG Next
Watch Time shift
Press c/d to select "Watch" or "Time shift",
3
and then press ;.
• If you select "No", the TV returns to the EPG screen.
Press c/d to select "Yes", and then press ;.
4
• The selected TV programme is marked with an icon.
Press ; to select "Back".
5
NOTE
• You cannot select "Time shift" when the registered USB
storage device is not connected to the USB port.
• Only one time shift timer setting can be set.
• A combined total of 16 timer settings ("Watch" and
"Time shift") can be set.
Cancelling the timer setup
Press EPG.
1
Press a/b/c/d to select the programme with
2
timer setup, and then press ;.
Press c/d to select "Cancel", and then press ;.
3
Press c/d to select "Yes", and then press ;.
4
E
Cancelling using B button on the
remote control unit
Press EPG.
1
Press B to display the timer setup list.
2
Press a/b to select the programme you want
3
to cancel timer setup, and then press ;.
Press c/d to select "Cancel", and then press ;.
4
Press c/d to select "Yes", and then press ;.
5

Teletext

What is teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped TV. Your
TV receives teletext signals broadcast by a TV
network, and decodes them into graphical format
for viewing. News, weather and sports information,
stock exchange prices and programme previews are
among the many services available.
Turning teletext on/off
No
Select a TV channel or external source providing
1
a teletext programme.
Press m to display the teletext.
2
• Many stations use the TOP operating system, while
some use FLOF (e.g., CNN). Your TV supports both
these systems. The pages are divided into topic
groups and topics. After switching on the teletext,
up to 2,000 pages are stored for fast access.
• If you select a programme with no teletext signal,
"No Teletext available" displays.
• The same message displays during other modes if
no teletext signal is available.
• Each time you press m, the screen switches as
shown above.
• Press m again to display the teletext on the right
screen and the normal image on the left screen.
NOTE
• Teletext will not work if the selected signal type is RGB
(Page 41).
• Teletext will not work in 3D mode.
Buttons for teletext operations
Buttons
Increase or decrease the page number.
:r/s
Directly select any page from 100 to
Numeric
899 by using the 0_9 numeric buttons.
buttons 0_9
TELETEXT TELETEXT
Description
22
Select a group or block of pages
displayed in the coloured brackets at
Colour
the bottom of the screen by pressing
(R/G/Y/B)
the corresponding colour (R/G/Y/B) on
the remote control unit.
k (Reveal
Reveal or hide hidden information such
hidden
as an answer to a quiz.
teletext)
Stop updating teletext pages
3 (Freeze/
automatically or release the hold mode.
Hold)
Display the subtitle or exit the subtitle
screen.
[ (Subtitle
• Subtitles will not be displayed when
for teletext)
the service does not contain subtitle
information.
Reveal or hide subpages.
• Move to the previous subpage (R).
• Move to the following subpage (G).
1 (Subpage)
• These two buttons are shown on the
screen by the symbols "e" and "f".
Display the top menu.
• The top menu will not be displayed
;
when the service does not support
top menus.
MHEG-5 application (UK only)
Some services bring you programmes with the
MHEG application encoded, letting you experience
DTV interactively. When provided, the MHEG-5
application will start when you press m.
NOTE
• MHEG may not be displayed properly in 3D mode.
(741 series only)
NOTE
• You can view some MHEG-5 content even if you do not
perform "Network setup". Furthermore, "Network setup"
allows you to view additional content such as interactive
content from "HOME" > "TV Menu" > "Setup" > "View
setting" > "Network setup".
• You cannot view MHEG-5 content when MHEG-5
content is not broadcast even if you perform the
appropriate "Network setup". Carefully check the
broadcast programme.