Audio Settings - Sharp AQUOS LC-70LE741E Operation Manual

Basic adjustment

Audio settings

Go to "HOME" > "TV Menu" > "Setup" >
"Audio".
CH list Setup
:Enter :Back
Auto volume
Treble
Bass
Balance
L30
Audio
Auto volume
Different sound sources sometimes do not have
the same volume level, such as a programme and
its commercial breaks. This function reduces this
problem by equalizing levels.
Item
Strongly reduces the volume gaps among
High
different sound sources.
Middle
Slightly reduces the volume gaps among
Low
different sound sources.
Does not adjust the volume gaps.
Off
Audio
Audio adjustment
You can adjust the sound quality to your preference
with the following settings.
Menu
Item
Treble
Bass
Audio
Balance
STANDARD
[Off]
Audio
Surround
This function produces a surround effect from the
speakers.
R30
3D Hall
3D Movie
3D
Standard
On
Off
Audio
Bass enhancer
This function allows you to enjoy bass-enhanced
sound.
c (Cursor) d (Cursor)
For weaker treble For stronger treble
For weaker bass For stronger bass
Decrease audio Decrease audio
from the right from the left
speaker speaker
Item
Reproduces a concert hall experience with
realistic live surround sound based on
reverberant sounds measured in a concert
hall.
Reproduces a movie theater experience
with realistic live surround sound based on
reverberant sounds measured in a movie
theater.
Creates three-dimensional surround sound
with detailed control of the signal phase.
Provides limited surround sound.
Outputs normal sound.
33
Audio
Clear voice
This function emphasises speech against
background noise for greater clarity.
Audio
Audio description setting
This function allows you to enable output of audio
description if the TV receives a signal including
audio description.
NOTE
• When the "Audio description" is set to "On", the audio
description sound is superimposed on the main audio
when you select a broadcast compatible with audio
description.
• If you do not clearly hear the sound for the visually
impaired, go to "HOME" > "TV Menu" > "Setup" >
"Audio" > "Audio description setting" > "Mix level", and
select the upper level to turn up the volume.
• This function is available only for DTV broadcasts. This
"Audio description setting" menu is not displayed for
the ATV or the external inputs.
• The audio description sound is superimposed on
the main audio only when the sound is output on the
speaker sound output, headphone sound output and
sound for audio out output. The sound is not output on
the S/PDIF sound output and the SCART sound output.
• This function is not available for the AQUOS Audio
speaker system.
• This function does not work during time shift playback.