Connecting A Pc; Displaying A Pc Image On The Tv - Sharp AQUOS LC-70LE741E Operation Manual

Connecting a PC

Connecting a PC
HDMI connection
PC HDMI 1, 2, 3 or 4 terminal

HDMI-certified cable (commercially available)
PC
 
ø 3.5 mm stereo DVI/HDMI cable
minijack cable (commercially
(commercially available)
available)
* When using the HDMI 2 terminal, you must select the
proper item in the "Audio select" menu depending on
the type of HDMI cable connected (refer to page 41 for
details).
Analogue connection
PC

RGB cable
(commercially
available)
PC
HDMI 2 terminal*

DVI/RGB conversion
cable
(commercially
available)
* When using the PC terminal, you must select
"Video+Audio" in the "Audio select" menu (refer to page
41 for details).
NOTE
• The PC input terminals are DDC 2B-compatible.
• Refer to page 54 for a list of PC signals compatible with
the TV.

Displaying a PC image on the TV

PC terminal*
Selecting the picture size
You can select the picture size.
1
2
EXAMPLE

ø 3.5 mm stereo
minijack cable
(commercially
available)
PC terminal*
Normal

ø 3.5 mm stereo
minijack cable
Cinema
(commercially
available)
Full
Dot by Dot
NOTE
• You can also select an item from the "Wide mode" menu
(Page 40).
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
• You may not be able to change the wide mode while in
3D mode.
• Refer to page 40 for AV signals.
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
• The PC terminal is not compatible with 480i/576i/1080p
signals.
52
Press f.
• The "Wide mode" menu displays.
Press f or a/b to select the desired item.
Normal
Item
Keeps the original aspect ratio in a full
screen display.
For letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
An image fully fills the screen.
Displays an image with the same
number of pixels on the screen.
Full