Selecting A Sound Mode - Sharp AQUOS LC-70LE741E Operation Manual

Watching TV

Selecting a sound mode

E
DTV/SAT mode
If multi sound modes are received, each time you
press 7 the mode switches as follows.
Audio (ENG) STEREO
L/R L R
Audio (ENG) CH A
CH A CH B
Audio (ENG) MONO
Press c/d to select L or R sound when the
STEREO or DUAL MONO screen is displayed.
Audio (ENG) STEREO
L/R L R
NOTE
• The sound mode screen disappears in six seconds.
• Selectable items vary depending on the received
broadcasts.
• When the "Audio description setting" menu is set
to "On", the audio description sound is selected
depending on the main audio.
E
ATV mode
Each time you press 7, the mode switches as
shown in the following tables.
NICAM TV broadcasts selection
Signal Selectable items
NICAM STEREO, MONO
Stereo
NICAM CH A, NICAM CH B, NICAM CH AB,
Bilingual
MONO
Monaural NICAM MONO, MONO
Signal
Stereo
Bilingual
Monaural MONO
NOTE
• When no signal is input, the sound mode will display
LR
"MONO".
Channel display
CH AB
You can display the channel information by pressing
p on the remote control unit.
DTV mode
Audio (ENG)
Video
Subtitle
LR
>> New information
Four digit numbers (e.g., 0001) are displayed after
I
selecting the five Nordic countries in the country
setting.
J Satellite channels are displayed by four digit numbers
(e.g., 0001).
K You can set four satellite stations to "SAT1", "SAT2",
"SAT3", "SAT4".
E
Time display in channel information
You can display the time information included in
DTV, SAT and teletext broadcasts.
A2 TV broadcasts selection
Selectable items
STEREO, MONO
CH A, CH B, CH AB
ATV mode
STEREO
Auto
MONO
Off
Subtitle
SAT mode
Audio (ENG) STEREO
Video
Subtitle Off
>> New information
19
NOTE
• Skip step 1 if receiving DTV/SAT broadcasts.
Select a TV channel (the time information is
1
automatically captured).
Press p. The channel display will appear on the
2
TV.
Press p again within the several seconds
3
that the channel display is on the screen. Time
information will be shown in the lower-right
corner of the screen for several seconds.
Even when you change the TV channel, you can
4
display the time information with steps 2 and 3
above.
Operation without a remote control unit
You can operate the menu settings using the TV
control buttons.
TV control buttons Remote control buttons
@
b
:r/s
i+/-
–
;
a/b
d/c