Preparing To Move The Fastt700 Storage Server; Checking The Battery Service Date - IBM TotalStorage FAStT700 User Manual

2. Check the Battery Support Information label, as shown in Figure 31.
Figure 31. Checking the battery service date
3. Do one the following:

Preparing to move the FAStT700 Storage Server

Remove each component CRU before moving the FAStT700 Storage Server to a
new location or before removing the chassis from its rack cabinet. This helps
safeguard the equipment and ensures a smoother transition to the new
environment.
If you are moving the FAStT700 Storage Server a short distance, and you have
sufficient assistance or equipment, you might be able to move the FAStT700
Storage Server without removing each component CRU. If you do not have
sufficient assistance or equipment, use the procedure in "Moving or relocating the
FAStT700 Storage Server" on page 33 to safely move the equipment to its new
location.
If you are moving the FAStT700 Storage Server a significant distance, be sure to
pack it in its original shipping container.
® ™
32
IBM TotalStorage FAStT700 Fibre Channel Storage Server: User's Guide
The Battery Support Information label on the front of the battery has three
dates:
v Date of Manufacture - Date the battery was built at the factory
v Date of Installation - Date the battery was installed in the FAStT700 Storage
Server
v Replacement Date - Battery replacement date (see the note at the beginning
of this section)
v If it is time to replace the battery, install a new battery using the procedure
described in "Replacing a failed battery" on page 39.
v If it is not time to replace the battery, replace the FAStT700 Storage Server
bezel, as shown in Figure 21 on page 17.