IBM TotalStorage FAStT700 User Manual page 52

10. Connect the interface cables and host Fibre Channel cables that you labeled in
11. Connect the remaining cables to the FAStT700 Storage Server.
12. Turn on power to the FAStT700 Storage Server. Use the procedure in "Turning
13. Replace the FAStT700 Storage Server bezel.
® ™
34
IBM TotalStorage FAStT700 Fibre Channel Storage Server: User's Guide
8. To install the FAStT700 Storage Server into a rack cabinet in the new location,
do the following:
a. Slide the FAStT700 Storage Server into the rack cabinet.
b. Insert and tighten two of the screws that you removed in Step 5, on the
inside front of the FAStT700 Storage Server.
c. Insert and tighten the remaining two screws that you removed in Step 5, on
the inside rear of the FAStT700 Storage Server.
9. Replace all CRUs in the FAStT700 Storage Server.
Step 3 on page 33.
on the power" on page 18.