Advertisement
Brought to You by www.snapwhole.com
1.
Your Pneumatic Tools should be kept clean, dry and protected from corrosion
or damage.
2.
When not in use, store your tool kit out of the reach of children. Do not allow it
to be exposed to water, corrosive materials, or undue banging around.
3.
If you are not using an in-line oiler, you should inject a few drops of pneumatic
oil into the air inlet of each tool after every hour of continuous use.
4.
If your tool loses power, or you notice air leaks, take it to a certified technician
for service.
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE
BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT,
THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS
AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT
OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
NOTE: Some parts are listed and shown for illustration purposes only and are not
available individually as replacement parts. Some parts are available only as part of
an assembly.
SKU 46446
For technical questions and replacement parts, please call 1-800-444-3353
Maintenance
PLEASE READ THE FOLLOWING CAREFULLY
Page 23
Advertisement
