Advertisement
Brought to You by www.snapwhole.com
Air Hammer Specific Safety Warnings.
NOTE: Part numbers in this section refer
to the Parts List and Assembly Drawing
on page 22.
1.
Repetitive motions or exposure to
vibration may be harmful to your
hands and arms.
2.
When wearing gloves to operate the
Air Hammer, make sure that the
gloves do not interfere with operating the Trigger (16d). Test your gloves with the
Trigger (16d) before attaching the unit to an air source.
3.
Never start the tool unless you have a firm grip with both hands and you are
positioned at your workpiece or area.
4.
Before using the Air Hammer, know what is directly underneath the work area
or workpiece. The Air Hammer can quickly penetrate material. If working
directly on the ground, make sure you are not directly above shallow cables,
lines, or pipes.
5.
Keep your limbs and body clear of the Air Hammer. If a chisel or bit breaks
off, the tool tends to surge forward suddenly. Make sure the immediate area
is clear of other people or animals. Spectators must stay at a safe distance.
6.
Never point the tool or the air hose (not included) at anyone.
7.
Keep your finger away from the Trigger (16d) until you are ready to work.
Warning!! Any spectators in the area will need eye and ear protection.
Beware of flying chips of wood, concrete, metal, or any other material
being hammered.
Warning: Always disconnect the tool from the air source before examining
or changing bits.
1.
Select the appropriate chisel/bit. Unscrew the Retainer Spring (15d) and
insert the shank of the chisel/bit. Screw the Retainer Spring (15d) back onto
the Cylinder (14d). Holding the Air Chisel firmly, pull the chisel/bit hard to
make sure it locked into place.
Note: Before connecting the air supply, make sure you are wearing safety goggles
and a full face mask, ear protection, and steel toe shoes.
SKU 46446
For technical questions and replacement parts, please call 1-800-444-3353
Air Hammer
OPERATION
Page 20
Advertisement
