Central Pneumatic 47214 Owner's Manual And Safety Instructions
  1. Manuals
  2. Brands
  3. Central Pneumatic Manuals
  4. Power Tool
  5. 47214
  6. Owner's manual and safety instructions

Central Pneumatic 47214 Owner's Manual And Safety Instructions

3/8" professional air ratchet
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
3/8" professional
air ratchet
REV 11l
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2002 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SaVE thiS manual.
ITEM 47214

Advertisement

Table of Contents
loading

Related Manuals for Central Pneumatic 47214

Summary of Contents for Central Pneumatic 47214

  • Page 1 2002 by Harbor Freight Tools No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.

  • Page 2: Table Of Contents

    Addresses practices not related to personal injury. 3. Keep bystanders, children, and visitors away while operating the tool. Distractions are able to result in the loss of control of the tool. Item 47214...

  • Page 3: Personal Safety

    Item 47214 For technical questions, please call 1-800-444-3353. 5. Do not overreach. keep proper footing and balance at all times.

  • Page 4: Air Source

    WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved eye protection. WARNING marking concerning Risk of Hearing Loss. Wear hearing protection. WARNING marking concerning Risk of Respiratory Injury. Wear NIOSH-approved dust mask/respirator. WARNING marking concerning Risk of Explosion. Item 47214...

  • Page 5: Specific Safety Instructions

    SaVE thESE inStRuctiOnS. Item 47214 For technical questions, please call 1-800-444-3353. 3. Only use with accessories rated to handle the forces exerted by this tool during operation.

  • Page 6: Specifications

    130 RPM 6 CFM @ 90 PSI 3/8″ CW 48 ft. lbs. CCW 50 ft. lbs. Excess air pressure is hazardous and may cause the tool to exceed stated maximum speed. Figure a Air Inlet (43) Throttle Lever (9) Item 47214...

  • Page 7: Setup

    The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. Item 47214 For technical questions, please call 1-800-444-3353. 3. Turn the tool's throttle or switch to the off position;...
  • Page 8 Page 8 For technical questions, please call 1-800-444-3353. Item 47214...
  • Page 9 Item 47214 For technical questions, please call 1-800-444-3353. Page 9...

  • Page 10: Operation

    3. Secure loose workpieces using a vise or clamps (not included) to prevent movement while working. 4. There must not be hazardous objects (such as utility lines or foreign objects) nearby that will present a hazard while working. Item 47214...

  • Page 11: General Operating Instructions

    Hold the tool firmly and squeeze the Throttle. Do not hold the socket. 6. When job is done, release Throttle. Item 47214 For technical questions, please call 1-800-444-3353. 7. If the tool requires more force to accomplish...

  • Page 12: Maintenance

    For technical questions, please call 1-800-444-3353. 2. Quarterly (every 3 months) – tool Disassembly, cleaning, and inspection: Have the internal mechanism cleaned, inspected, and lubricated by a qualified technician. If the vanes need replacement, replace them all as a set. Item 47214...

  • Page 13: Troubleshooting

    4. Dirty, worn or damaged valve. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. Item 47214 For technical questions, please call 1-800-444-3353. likely Solutions 1. Check for loose connections and make sure that air supply is providing enough air flow (CFM) at required pressure (PSI) to the tool's air inlet.

  • Page 14: Parts List And Diagram

    For technical questions, please call 1-800-444-3353. part Description Idler Gear Plate Clamp Nut Spacer Ratchet Housing Needle Bearing Crank Shaft Drive Bushing Ratchet Yoke Anvil Spring Washer Thrust Washer Retainer Ring Ratchet Pawl Spring Lock Pin Direction Lever Steel Ball Air Inlet Item 47214...

  • Page 15: Assembly Diagram

    Diagram Item 47214 For technical questions, please call 1-800-444-3353. Page 15...

  • Page 16: Warranty

    90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents