Advertisement
Brought to You by www.snapwhole.com
NOTE: Part numbers in this
section refer to the Parts
List on page 14 and the
Assembly Drawing on
page 15.
CAUTION: Firmly clamp
or otherwise mount the
workpiece
to
workbench or other fixed
object prior to working on
it. This will allow you to use both hands on this tool during operation.
WARNING: Always wear a full face mask and respirator when using the Air Die Grinder.
Loose particles will be thrown off which can cause injury to the face or respiratory tract.
1.
Use the two open end spanners (provided) to loosen the Collet Nut (25b).
2.
Select the correct diameter Collet for the grinding bit you will use. This kit
includes 1/4" and 1/8" Collets, to fit same sized grinding bits. Insert the Collet
(26b) into the Spindle (27b).
3.
Insert the shank of the selected grinding bit fully into the Collet (26b). Then,
using both open end Spanners, firmly retighten the Collet Nut (25b) to lock
both the Collet and Grinding Bit in place.
4.
Connect the Air Supply Hose (not included) to the quick connector (not included) on the
Die Grinder. Turn on the air compressor (not included) and set its regulator to 90 PSI.
5.
Grip the Die Grinder with both hands.
6.
Release the Safety (8b) and slowly apply hand pressure to the Trigger (4b).
The tool will begin to operate. Notice that you can control the speed of the tool
by varying the amount of hand pressure on the Trigger (4b).
7.
With a firm grip on the Die Grinder, lightly apply the grinding bit to the
workpiece. Slowly and steadily move the grinding bit around on the work piece
as required to complete the task.
8.
When the work is finished, remove the tool from the workpiece, and release
your pressure on the Trigger (4b). The tool will stop operating.
9.
Turn off the air compressor and disconnect the tool from the air supply hose.
Release the Safety (8b) and press the Trigger (4b) to release any trapped air
from the tool.
SKU 46446
For technical questions and replacement parts, please call 1-800-444-3353
1/4" Air Die Grinder
OPERATION
your
Page 13
Advertisement
