Guest Check Copy; Validation Printing Function; Employee's Arrival/Departure Time Printing - Sharp UP-700 Instruction Manual

Guest Check Copy

You can use this function when you want to take a copy of guest check.
y
Press the key and make a desired entry.
Procedure
y
• The guest check copy has nothing to do with the memory.
NOTE
• The operation is the same as normal entry. But the validation printing is disabled and the
drawer does not open.
Example

Validation Printing Function

The POS terminal can perform validation printing when it is connected with the slip printer. For the details of
slip printer, contact your authorized SHARP dealer.
1.
Set a validation slip to the slip printer.
√
2.
Press the key. The validation printing will start.
Programmed compulsory validation printing can be overridden by performing the following
NOTE
operation. If you need this function, contact your authorized SHARP dealer.
1. Move the mode key to MGR position.
C √
2.

Employee's Arrival/Departure Time Printing

The POS terminal can perform employee's arrival and departure time printing when it is connected with the
slip printer. For the details of slip printer, contact your authorized SHARP dealer.
For printing, you must be in the REG mode.
Printing of arrival time
Clerk:
Printing of departure time
Clerk:
76
Item entries Finalization
Key operation
y
x 1
10
c
√
1
√
2
ß r
To print on When the receipt
the slip paper "OFF" status
Print
Cashier:
11
(Only in clerk + cashier system)
Cashier:
22
(Only in clerk + cashier system)
√
√