Tax Programming; Customer Programming - Sharp UP-700 Instruction Manual

Tax Programming

Use the following procedure to select any option included in the tax group:
Procedure

Customer Programming

Use the following procedure to select any option included in the customer programming group:
Procedure
The following illustration shows those options included in the customer programming group.
15 CUSTOMER
164
1.
From the SETTING menu, select "14 TAX."
• The TAX menu will appear.
2.
Select any option from the following options list:
1 TAX1:
3 TAX3:
5 TAX5:
NOTE
D
If the key is pressed on the tax number selection menu, the tax rate in
the cursor position will be deleted.
3.
Program each item as follows:
• RATE SIGN (Use the selective entry)
–: Minus rate
+: Plus rate
• TAX RATE (Use the numeric entry)
Tax rate (max. 7 digits: 0.0000 to 999.9999%)
• LOWER TAX LIMIT (Use the numeric entry)
Lowest taxable amount (max. 5 digits: 0.01 to 999.99)
• This option is not available in the VAT system.
1.
In the SETTING window, select "15 CUSTOMER".
2.
Select an option form the following option list:
1 CUSTOMER:
2 CUSTOMER PROG.:
1 CUSTOMER
2 CUSTOMER PROG.
Tax 1 2 TAX2: Tax 2
Tax 3 4 TAX4: Tax 4
Tax 5 6 TAX6: Tax 6
Customer code
Customer programming
See "Customer code" on page 165.
See "Customer programming" on page 165.