Vip Sales; Customer Management - Sharp UP-700 Instruction Manual

VIP sales

This function is used for transaction for the important guest who is free of charge. In this mode, any unit
price is not counted.
Procedure
Example
Unit price
programmed for
PLU1: 1.15
Unit price
programmed for
PLU2: 15.00

Customer management

Your POS terminal can provide the customer management function.
To enable the customer management function, enter the customer code assigned to a customer. You can
enter the customer code at any point during a transaction.
Normally customer information (name, code and address) are previously set by the programming. However,
you can enter a new customer information during transaction. When an undefined customer code is
entered, the message, "UNDEFINED CODE" is displayed, then you can enter the customer's name and
address, which are saved in the customer file.
For the customer registered, you can allow to defer his/her payment. Take the tentative finalization using
the key. The sales amount is accumulated to the charge amount of each customer. When the
customer settles his/her charge account take the received-on account entry.
Procedure
*Scan customer code
Name entry
(max.16 characters)
*: Scanning the customer code on a Customer Card provided to the customer, or EAN-13 format bar code.
Additionally the customer code can be read by the optional magnet card reader.
**: When a code entered for the customer entry does not exist in the customer file, "UNDEFINED CODE" is
displayed for a moment with beep sounds. Then the NAME entry window is displayed to prompt to operator
to enter a customer's name.
***: The ADDRESS entry window is displayed.
[Item entries]
Key operation
1
2
3
Customer code
(max.13 digits)
or
***
*Less than the programmed upper limit amount
**
Address entry
(max.40 characters)
Print
Sales registration
or
67