Personnel Programming; Clerk - Sharp UP-700 Instruction Manual

Personnel Programming

Use the following procedure to select any option included in the personnel group:
Procedure
The following illustration shows those options included in the personnel programming group.
7 PERSONNEL

Clerk

In case that "cashier system" is applied to your POS terminal, use this Clerk programming
NOTE
settings instead of Cashier programming.
In case that "clerk + cashier system" is applied to your POS terminal, data except CODE, NAME
and KEY No. are not effective.
Procedure
The screen continues.
142
1.
From the SETTING menu, select "7 PERSONNEL."
• The PERSONNEL menu will appear.
2.
Select any option from the following options list:
1 CLERK:
2 CASHIER:
1 CLERK
2 CASHIER
Program each item as follows:
• SECRET CODE (Use the numeric entry)
Secret code (max. 4 digits: 0001 to 9999/0000)
• NAME (Use the character entry)
Name for the clerk. Up to 12 characters can be entered.
• KEY No. (Use the numeric entry)
Key number (0 through 255)
The entry of "0" disables the use of real clerk keys.
• SUPERVISOR (Use the selective entry)
YES: Enables supervisor clerk.
NO: Disables supervisor clerk.
• VIP1 through 3 SALE (Use the selective entry)
DISABLE: Disables VIP sale.
ENABLE: Enables VIP sale.
• GLU TYPE (Use the selective entry)
GLU:
NON-COMPUL.: Makes GLU system/non-compulsory.
Clerk
Cashier
See "Clerk" on page 142.
See "Cashier" on page 144.
Makes GLU system compulsory.