Changing The Size Of A Fax - Sharp MX-C380 Quick Start Manual

CHANGING THE SIZE OF A FAX

The size of the original and the transmission size can be specified before
transmission.
This is convenient when faxing an original that is small and difficult to read.
The procedure for faxing both sides of an A4 original at A3 size is explained
below.
The side to be scanned must be face up!
(1)
(2)
(3)
(4)
1
Place the originals.
When using the document glass,
place the original with the side to be
scanned face down.
2
Select settings. (Scan size)
BACK OK
(1) Select the [Original] key.
Select with
(2) Select the [Duplex Setup]
BACK OK
key.
Select with
(3) Select the [2-Sided
BACK OK
Booklet] key.
Select with
This key is used to send a 2-sided
original.
(4) Make sure that the size of
BACK OK
the placed original is
displayed.
If the wrong size appears, select
the key and select the correct size.
and press [OK].
and press [OK].
and press [OK].
77