Scanning An Original - Sharp MX-C380 Quick Start Manual

SCANNING AN ORIGINAL

The basic operation for scanning is
explained below.
This section explains how to send a scanned
file by e-mail.
IMAGE SEND
The side to be scanned must be face up!
(2)
(1)
(3)
1
Press the [IMAGE SEND]
key.
The base screen of scan mode
appears. If the screen does not
appear, select the [Mode Switch]
BACK OK
key and then the [Scan] key.
2
Place the originals.
When using the document glass,
place the original with the side to be
scanned face down.
3
Select settings.
BACK OK
(1) Make sure that the size of
the placed original is
displayed.
Select with
If the wrong size appears, select
the key and select the correct size.
(2) Select the [Address] key.
BACK OK
Select with
(3) Select the [Address Entry]
key.
Select with
Scan
transmission
Original Scanned image
and press [OK].
and press [OK].
and press [OK].
101