Changing The Size Of A Fax - Sharp DX-C401 Quick Start Manual

CHANGING THE SIZE OF A FAX

The size of the original and the transmission size can be specified before
transmission.
This is convenient when faxing an original that is small and difficult to read.
The procedure for faxing both sides of an 8-1/2" x 11" original at 11" x 17"
size is explained below.
The side to be scanned must be face up!
Scan Internet Fax
(1)
Address Book
Original Scan:
Direct TX Exposure Auto
Sub Address
Standard
Resolution
Address Review Special Modes
File
Quick File
Fax Memory:100%
Fax/Original
Scan Size
8½x11
(3)
2-Sided
2-Sided
Tablet
Booklet
(2)
Fax USB Mem. Scan PC Scan
Auto
Send:
8½x11
Auto Reception
OK
100% Send Size
Auto
(4)
Image Orientation
1
Place the originals.
When using the document glass,
place the original with the side to be
scanned face down.
2
Select settings in the touch
panel.
(1) Touch the [Original] key.
(2) Touch the [2-Sided
Booklet] key.
This key is used to send a 2-sided
original.
(3) Make sure that the size of
the placed original is
displayed.
If the wrong size appears, touch
the key and select the correct size.
(4) Touch the [Send Size] key.
79