Base Screen Of Scan Mode - Sharp MX-C380 Quick Start Manual

BASE SCREEN OF SCAN MODE

Press the [IMAGE SEND] key in the operation panel to open the base
screen of scan mode. If the screen does not appear, select the [Mode
Switch] key and then the [Scan] key.
Select various scan settings in the base screen.
(1)
(2)
(3)
(4)
(5)
(8)
(9)
(10)
(1) [Mode Switch] key
Use these keys to change the mode
of the image send function. To switch
to scan mode, select the [Scan] key.
(2) [Quick] key
Select this key to specify a
destination using a search number
* 3-digit number assigned to a
destination when it is stored.
(3) [Address] key
Select this key to use a one-touch
key or a group key.
(4) [Scan Size] key
Image settings (original size,
duplex setup, image orientation)
can be selected.
(5) [Send Size] key
Select this to specify the send size
*
. of the document.
(6) [Send Settings] key
Select this key to select or enter
the subject, file name, sender
name, or message text, which have
been previously stored in the Web
page.
(6)
(7)
(11)
(12)
99