Saddle Unit - Sharp MX-M1100 Maintenance Manual

SADDLE UNIT

1
Open the cover.
2
Pull out the unit.
3
Remove the staple case.
(1)
(2)
Replace the cartridges in the front and back staple
cases (two cartridges).
4
Release the staple case cover lock.
When staples remain, the lock cannot be released.
Slowly pull out the unit until it
stops.
(1) Grasp the green part and
pull it forward and down.
The unit that holds the
staple case will move
forward.
(2) Pull the staple case up
and out.
While holding both sides of the
staple case, pull up the upper
unit.
REPLACING THE STAPLE CARTRIDGE
5
Remove the staple cartridge.
6
Install a new staple cartridge.
Do not remove the seal from the cartridge before
inserting the cartridge into the case.
7
Push the staple case firmly back in.
8
Pull the seal that holds the staples
straight out.
Push the staple cartridge in until
it clicks into place.
11