Sharp MX-M1100 Maintenance Manual page 37

3
Pull the lever up in the direction of the
arrow so that it is horizontal.
4
Pull out the unit.
If the conveyor unit is not locked when you
remove a misfeed, your hand or fingers may
become pinched by the devices.
5
Turn the knob in the direction of the
arrow.
Keeping the lever horizontal,
gently pull out the unit until it
stops.
After pulling the unit all the way
out, make sure that the lever is
points down slightly. This locks
the unit.
6
Remove the misfed paper.
When removing misfed paper, do not touch or
damage the transfer belt.
7
Push the paper guide down in the
direction of the arrow.
8
Remove the misfed paper.
9
Pull the paper guide up in the direction
of the arrow.
REMOVING MISFEEDS
When released, the paper guide
automatically returns to its
original position.
35