Sharp MX-M1100 Maintenance Manual page 11

1
Pull out the cover.
2
Remove the toner cartridge.
Keep the used toner cartridge in a plastic bag until
your service technician comes to perform
maintenance. Your service technician will collect the
used cartridge.
3
Insert the new toner cartridge straight
down.
4
Close the cover.
Slowly pull out the cover until it
stops.
Slowly pull the toner cartridge
straight up and out.
If the cartridge is pulled out
abruptly, toner may spill.
The ends of the cartridge must
be oriented correctly or it will not
be possible to insert the
cartridge.
After the toner cartridge is
replaced, toner filling takes
place automatically.
If the message prompting you to
replace the toner does not
appear, do not open the cover.
REPLACING THE TONER CARTRIDGE
Caution
• Do not touch the toner
fill hole.
• Do not shake or swing
the toner cartridge.
• If a toner cartridge is
stored on end, the toner
may harden and become
unusable. Always store
toner cartridges on their
side.
• Do not throw a toner cartridge into a fire. Toner may
fly and cause burns.
• Store toner cartridges out of reach of small children.
• If a toner cartridge other than a
SHARP-recommended toner cartridge is used, the
machine may not attain full quality and performance
and there is a risk of damage to the machine. Be sure
to use a SHARP-recommended toner cartridge.
Depending on the conditions of use, printed images
may become faint or blurred.
9