Connecting The Controller - DURKOPP ADLER 610-10 Operating Instructions Manual

104
7.7.1

Connecting the controller

Fig. 61: Connecting the controller
①
②
(1) - Cable
(2) - Plugs
To connect the controller:
1. Lay all cables (1) to the controller and fix them in place with
cable ties.
2. Insert all plugs (2) following the marking on the rear of the
controller.
Important
Cable (1) and connection (3) have the same designation /
symbol!
Operating Instructions 610-10/630-10 - 01.0 - 01/2021
(3) - Connection
Setup
③