Service; Appliance-Specific Safety Instructions For Sabre Saws; Safety Guidelines For Battery Chargers - Parkside IAN 351750 2007 Translation Of The Original Instructions

6. Service

a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed by
the manufacturer or authorized service providers.
Appliance-specific safety instructions
for sabre saws
To avoid the risk of injury or fire as well as
health risks
■ Hold the power tool by the insulated grip-
ping surfaces when performing work
where the power tool may hit hidden
power lines or its own power cord. Contact
with a live wire may electrify exposed metal parts
of the power tool and could give the operator an
electric shock.
■ Secure and secure the workpiece to a
stable surface by means of clamps or
otherwise. Holding the workpiece by hand or
against your body will cause it to remain
unstable, resulting in loss of control.
■
Wear a dust mask!
│ GB │ IE
■ 6
Safety guidelines for battery
chargers
This appliance may be used by
■
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to use the appliance as a
toy. Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised.
To avoid potential risks, damaged
■
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person.
The charger is suitable
for indoor use only.
WARNING!
■ If the power cord requires replacement, this
should be carried out by the manufacturer or
an approved representative to avoid safety
hazards.
ATTENTION!
♦ This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/
PAP 20 A3/PAP 20 B1/PAP 20 B3.
♦ A current list of battery compatibility can be
found at www.lidl.de/Akku.
PSSA 20-Li A1