Kompernass WK 8 B3 Operating Instructions Manual page 30

♦ Then switch to the next field using the
buttons to set the minutes for the start of the active phase.
♦ Then switch to the next field using the
buttons to set the hour for the end of the active phase.
♦ Then switch to the next field using the
buttons to set the minutes for the end of the active phase.
The settings made here apply every day. The camera will not record
any images outside of the active phase.
Confirm your selection with the OK button. Afterwards, press the
♦
MENU button to close this sub-menu.
Time lapse
With this function the camera automatically takes pictures at an ad-
justable interval, without the motion sensor 5 having to register any
movement. This can be helpful, for example, if you want to observe
the blooming of plants or similar phenomena.
The "Single shot" setting creates individual photos or videos, depend-
ing on what you have selected in the "Time lapse video" menu. The
re cording interval set in this menu is the time that elapses between
the individual recordings.
The "Time lapse video" setting creates a video using the photos
from the time-lapse recording. One second of video consists of five
photos. In the following example, the recording interval is set to
30 seconds:
5 photos = 1s video
■ 26 │ GB │ IE
button. Press the
button. Press the
button. Press the
5 photos = 1s video
2s video
/
/
/
WK 8 B3