Kompernass IUK 5 A1 Operating Instructions Manual

Kompernass IUK 5 A1 Operating Instructions Manual

Ip surveillance camera
Hide thumbs Also See for IUK 5 A1:
Table of Contents

Advertisement

Available languages

Available languages

Quick installation guide

GB
IE
IP surveillance camera IUK 5 A1 (IAN 48807)
This guide shows you how to get your surveillance camera up and running in just a few steps using your smartphone or tablet. It also shows you how to connect to your Wi-Fi network.
Step 1
Screw the Wi-Fi antenna onto the camera.
Connect the mains adapter to the camera and
a mains power socket.
Using the supplied network cable, connect the
camera to your network router or switch.
Ensure that your smartphone or tablet is con-
nected to your Wi-Fi network.
Visit our product support website on www.kompernass.com to download the latest version of the operating instructions, any firmware updates and additional control software.
Step 2
If you are using an Android smartphone or
tablet, install the app "IUK Viewer" from the
Google Play Store.
If you are using an iPhone or iPad, install the
app "IUK Viewer" from the Apple App Store.
Start the app and tap on "Add a new camera".
Step 3
Select "Scan QR-Code" and scan the QR code
on the underside of the camera.
Step 4
Once the QR code has been successfully
scanned, the corresponding camera ID
appears in the CAMERA INFO.
Then tap on "Done".

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Kompernass IUK 5 A1

  • Page 1: Quick Installation Guide

    "IUK Viewer" from the Apple App Store. ■ Start the app and tap on "Add a new camera". Visit our product support website on www.kompernass.com to download the latest version of the operating instructions, any firmware updates and additional control software.
  • Page 2 You will find further information in the camera’s full operat- ing instructions. Visit our product support website on www.kompernass.com to download the latest version of the operating instructions, any firmware updates and additional control software.
  • Page 3 Sie sich die App „IUK viewer“ aus dem Apple App-Store. ■ Starten Sie die App und tippen Sie auf „Kamera hinzufügen“. Besuchen Sie unsere Produktunterstützungs-Webseite unter www.kompernass.com, um die aktuellste Version der Bedienungsanleitung, eventuelle Firmware-Updates und zusätzliche Bediensoftware herunterzuladen.
  • Page 4 Sie können die Kamera über die App bedienen. Weitere Informationen finden Sie in der ausführlichen Bedienungsanleitung der Kamera. Besuchen Sie unsere Produktunterstützungs-Webseite unter www.kompernass.com, um die aktuellste Version der Bedienungsanleitung, eventuelle Firmware-Updates und zusätzliche Bediensoftware herunterzuladen.
  • Page 5 IP SURVEILLANCE CAMERA IUK 5 A1 IP SURVEILLANCE CAMERA IP-ÜBERWACHUNGSKAMERA Operating instructions Bedienungsanleitung IAN 48807...
  • Page 6 Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the device. Klappen Sie vor dem Lesen die beiden Seiten mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut. GB / IE Operating instructions Page DE / AT / CH...
  • Page 9: Table Of Contents

    Central monitoring via special software ........33 IUK 5 A1...
  • Page 10 Importer ............. . 42 IUK 5 A1...
  • Page 11: Introduction

    A warning notice at this hazard level indicates an imminently hazardous situation. If the hazardous situation is not avoided, it could result in death or serious physical injury. ► Follow the instructions in this warning notice to avoid the risk of death or serious injury. IUK 5 A1...
  • Page 12: Safety

    DANGER! Do not allow children to play with the packaging material! Keep all packaging materials out of the reach of children. Risk of suffocation! ■ When mounting the device, ensure that it cannot fall and injure anyone. IUK 5 A1...
  • Page 13 A damaged mains adapter can cause a fire or electrical shock. Check the mains adapter regularly. If it is damaged, contact your nearest authorised customer service centre or your dealer to have it replaced. IUK 5 A1...
  • Page 14: Possible Infringements Of The Rights Of Third Parties

    Surveillance cameras at the workplace Surveillance at the workplace is subject to particularly strict regulations in Germany. Employers should not use surveillance cameras in the workplace in any cases where this could lead to a possible infringement of legal rights. IUK 5 A1...
  • Page 15 The brand names and logos used are the property of their respective manufacturers and are subject to their copyright provisions. Further information can be found in the respective publications of the manufacturers. IUK 5 A1...
  • Page 16: Operating Components

    Figure C: Thread for attaching the mounting arm Reset switch QR code for quick synchronisation with smartphone Mains adapter Wi-Fi antenna Mounting arm Network cable Figure D: Data CD Plug adapter for alarm connection Mounting material Operating instructions IUK 5 A1...
  • Page 17: Setting Up And Connecting

    Returning the packaging to the material cycle conserves raw materials and reduces the amount of waste which is generated. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations. IUK 5 A1...
  • Page 18: Set-Up Location Requirements

    (B) so that the camera is held securely on the mounting arm ■ Operate the device only in dry locations, never in a hot environment or anywhere near fl ammable materials. ■ Operate the device only in locations with adequate ventilation. IUK 5 A1...
  • Page 19: Power Supply

    OUT contacts. Here, a signal is produced as soon as the output is manually activated or when the output is selected for alarm signals and the surveillance camera recognises an alarm. The maximum switching capacity of the OUT contacts is 5 V/500 mA. ♦ For more information, read the operating instructions of the components involved. IUK 5 A1...
  • Page 20: Handling And Operation

    2.0 GHz or higher RAM: 512 MB or more Network card: 10 MBit/s or better Graphics card memory: 512 MB or more Supported web browsers: Internet Explorer 11, various others but with reduced functionality Screen resolution: 1024 × 768 or higher IUK 5 A1...
  • Page 21: Before Use

    Open the drive in Explorer and double-click on the fi le "Search Tool". This will start the program to search for your camera in the network (no fi les are installed on your computer). 1) Depending on your computer confi guration, a fi rewall warning will appear. Click on "Allow access". IUK 5 A1...
  • Page 22 Now enter the network data for the surveillance camera manually. Generally, these data include the network settings for your router. For further information, read the operating instructions for your router. Click "Apply" to accept the new settings. IUK 5 A1...
  • Page 23: Displaying The Camera Image In Internet Explorer 11

    ). Then click on "Upgrade" to carry out the required update. Displaying the camera image in Internet Explorer 11 NOTE ► You only have access to all of the features of the IP surveillance camera when using the Internet Explorer 11 browser. IUK 5 A1...
  • Page 24 Click on "Save". Shortly afterwards, the indicator bar appears on the lower edge of the screen. Here, click on "Open". An Explorer window will open. Double-click on the fi le "oPlayer.msi" and follow the on-screen instructions to install the plug-in. IUK 5 A1...
  • Page 25 5) Click on the "Security" tab, select "Trusted sites" and then click on the "Sites" button: 6) In the next window, you have the option to add the camera address to your trusted zone. Uncheck the box "Server verifi cation", click on "Add", then on "Close" and fi nally "OK". IUK 5 A1...
  • Page 26: Meaning Of The Control Buttons And Fields

    Click this button to mirror the image vertically. −> Click this button to mirror the image horizontally. −> Click this button to switch on an external alarm connection −> Click this button to switch off an external alarm connection IUK 5 A1...
  • Page 27: Frame Rate

    (1–16) of the desired position from the number fi eld that appears then. −> To display one camera image. −> To simultaneously display 4 camera images as tiles. −> To simultaneously display 9 camera images as tiles. The activated option is marked orange. IUK 5 A1...
  • Page 28 −> Click on this button to save a snapshot of the current camera image as a bitmap on your computer. −> Click on this button to open the confi guration described below in the browser interface. IUK 5 A1...
  • Page 29: Configuration Via The Browser Interface

    Here, you can give the device a different name so that you can identify it more easily in the network if necessary. A maximum of 24 characters can be used. Spaces may not be used; otherwise, the new name will not be accepted. IUK 5 A1...
  • Page 30 field "Reserved disk space (MB)". If you want previously saved videos to be overwritten when the allotted memory is full, check the box "Overwrite existing video files". Otherwise, no more new videos will be saved. IUK 5 A1...
  • Page 31: The "Alarm Settings" Page

    "Trigger level" to "High" or "Low". If you want to see a specific "Preset position when alarm is triggered", choose the desired position that was previously stored from the selection box under this menu item. IUK 5 A1...
  • Page 32 If you have checked the box "Alarm mail notification" on the menu page "Alarm settings", you can enter the e-mail address of the sender as well as the SMTP server and SMTP port to be used under "Sender’s email". Note the corresponding parameters and settings of your e-mail provider. IUK 5 A1...
  • Page 33 FTP server after the alarm has been triggered. After you have made your entries, you can test the FTP connection by clicking the "Test" button. Alarm logs Here you can view the alarm log file. IUK 5 A1...
  • Page 34: The "Network" Page

    Enter the name of the second DNS server here. This server will be used if the first server is not available. Http port: Enter the number 81 here. Otherwise, the transfer of the image to the computer will not work. IUK 5 A1...
  • Page 35: The "Pan & Tilt" Page

    Amount of patrols: Here you can set the number (1–10) of horizontal or vertical pans. These will be executed if the corresponding function is activated in the main menu. If the setting "Always" is selected, the camera pans continuously. IUK 5 A1...
  • Page 36: The "User Settings" Page

    ■ Then, in the upper device list, click on the name of the camera that you want to assign. The required information is added automatically. ■ Enter the user name and the password and click on "Add". IUK 5 A1...
  • Page 37 NOTE ► You may be able to display the camera image and make configuration settings in other browsers. However, it is possible that not all of the options described for Internet Explorer 11 will be available. IUK 5 A1...
  • Page 38: Operating Differences When Using The Smartphone Preview

    Tap on the entry to see the camera image on the smartphone display. ♦ Swipe over the screen to pan the camera head in the corresponding direction. NOTE ► Using the smartphone to control the device has no eff ect on the web interface. IUK 5 A1...
  • Page 39: Controlling The Camera Via Smartphone

    Tap this icon to rotate the display by 90°. −> Tap this icon to switch the audio transmission between camera and mobile on or off . −> Tap this icon to save a snapshot of the display. IUK 5 A1...
  • Page 40 Tap this icon to reset the brightness and contrast settings to the factory defaults. −> Tap this icon to switch the camera’s infrared LEDs on or off . −> Tap this icon to stop displaying the camera image. IUK 5 A1...
  • Page 41: Central Monitoring Via Special Software

    Afterwards, start the program "IUK Viewer" and confirm the authorisation query from the operating system’s firewall if applicable, when the program is started for the first time. On the bottom left in the program window, you will see a list of the installed cameras. IUK 5 A1...
  • Page 42 Therefore, they will not be described here again in detail. Configure the displayed parameters as required. Afterwards, click on the "OK" button. You can also open this window by clicking on "System settings" on the left of the main window. IUK 5 A1...
  • Page 43: Device Settings

    You can also open this window by clicking on "Device settings" on the left of the main window. Click on "Add" if you want to add a camera in the subsequent window by manually entering the connection details. After making your entries, click on "OK" to close the window. IUK 5 A1...
  • Page 44 If new cameras are found by the "Search" function, they can be added to the list by double-clicking on the camera. A camera can also be installed multiple times. You can also open this device list by clicking on "Device settings" on the left of the main window. IUK 5 A1...
  • Page 45 When using more than one camera, you must start by clicking on the image of the camera that you want to control with the mouse. The activated image will be bordered in red. IUK 5 A1...
  • Page 46: Cleaning

    Observe the following safety information to avoid hazards and property damage: ► Repairs to electrical devices should only be carried out by specialists trained by the manufac- turer. Improper repairs can cause considerable risks to users and damage to the device. IUK 5 A1...
  • Page 47: Fault Causes And Rectification

    NOTE ► If you are unable to resolve the problem by taking any of the aforementioned steps, please contact the Customer Service department. IUK 5 A1...
  • Page 48: Appendix

    Vertical: 105°, horizontal: 355° Min. illumination 2.0 lux @ 500 nm Operating temperature 5 to +40°C Storage temperature −10 to +60°C Humidity (no condensation) 5 to 75% Dimensions approx. 11.8 x 10.3 x 12.9 cm Weight approx. 300 g IUK 5 A1...
  • Page 49: Warranty

    Any damage and defects present at the time of purchase must be reported immediately after unpacking, but no later than two days after the date of purchase. Repairs carried out after expiry of the warranty period shall be subject to charge. IUK 5 A1...
  • Page 50: Service

    IAN 48807 Service Ireland Tel.: 1890 930 034 (0,08 EUR/Min., (peak)) (0,06 EUR/Min., (off peak)) E-Mail: kompernass@lidl.ie IAN 48807 Hotline availability: Monday to Friday 08:00 - 20:00 (CET) Importer KOMPERNASS HANDELS GMBH BURGSTRASSE 21 44867 BOCHUM GERMANY www.kompernass.com IUK 5 A1...
  • Page 51 Zentrales Monitoring über spezielle Software ....... . . 75 IUK 5 A1...
  • Page 52 Importeur ............. 84 IUK 5 A1...
  • Page 53: Einführung

    Situation. Falls die gefährliche Situation nicht vermieden wird, kann dies zum Tod oder zu schweren Verlet- zungen führen. ► Die Anweisungen in diesem Warnhinweis befolgen, um die Gefahr des Todes oder schwerer Verletzungen von Personen zu vermeiden. IUK 5 A1...
  • Page 54: Sicherheit

    Person benutzen. ■ GEFAHR Verpackungsmaterialien sind kein Kinderspielzeug! Halten Sie alle Verpackungsma- terialien von Kindern fern. Es besteht Erstickungsgefahr! ■ Achten Sie beim Befestigen des Gerätes auf sicheren Halt, damit es nicht herunterfallen kann und Menschen verletzen kann. IUK 5 A1...
  • Page 55 Ein beschädigter Netzadapter kann einen Brand oder elektrischen Schlag verursachen. Prüfen Sie den Netzadapter von Zeit zu Zeit. Sollte er beschä- digt sein, wenden Sie sich an Ihre nächste autorisierte Kundendienststelle oder Ihren Händler, um ihn zu ersetzen. IUK 5 A1...
  • Page 56: Mögliche Verletzung Von Rechten Dritter

    Eine personelle Bestimmbarkeit liegt vor, wenn festgestellt werden kann, dass eine bestimmte Person zu einer bestimmten Zeit an einem bestimmten Ort war. Die Identifikation kann dabei auch über ein personenbezogenes Kennzeichen, wie z. B. das Fahrzeugkennzeichen, erfolgen. Eine personelle Bestimmbarkeit von Personen ist unbedingt zu vermeiden. IUK 5 A1...
  • Page 57 Anleitung stellt keine Urheberrechtsverletzung dar, sondern dient als Hinweis. Auch wenn diese an den jeweiligen Stellen nicht als solche gekennzeichnet sind, gelten die entsprechenden gesetzlichen Bestimmungen. Die verwendeten Markennamen und -logos sind Eigentum der Hersteller und unterliegen deren Urheberrechtsbestimmungen. Informationen hierzu entnehmen Sie bitte den entsprechenden Veröffentlichungen der Hersteller. IUK 5 A1...
  • Page 58: Bedienelemente

    Anschluss für die Versorgungsspannung vom Netzadapter Alarmanschluss (IN/OUT) LAN-Anschluss AUDIO-Ausgang Abbildung C: Gewinde zur Befestigung auf dem Montagearm Reset-Schalter QR-Code zur schnellen Synchronisierung mit einem Smartphone Netzadapter WLAN-Antenne Montagearm Netzwerkkabel Abbildung D: Daten-CD Steckadapter für den Alarmanschluss Montagematerial Bedienungsanleitung IUK 5 A1...
  • Page 59: Aufstellen Und Anschließen

    Die Verpackung schützt das Gerät vor Transportschäden. Die Verpackungsmaterialien sind nach umweltverträglichen und entsorgungstechnischen Gesichtspunkten ausgewählt und deshalb recyclebar. Die Rückführung der Verpackung in den Materialkreislauf spart Rohstoffe und verringert das Abfallaufkommen. Entsorgen Sie nicht mehr benötigte Verpackungsmaterialien gemäß den örtlich geltenden Vorschriften. IUK 5 A1...
  • Page 60: Anforderungen An Den Aufstellort

    Unterseite des Kamerafußes ■ Öff nen Sie ggf. die Schraubverbindung (B), um den Winkel des Montagearms zu verändern. Anschließend drehen Sie die Schraubverbindung (B) wieder fest zu, damit die Kamera sicher auf dem Montagearm gehalten wird. IUK 5 A1...
  • Page 61: Stromversorgung

    Insgesamt besteht der Alarm-Anschluss aus 4 Anschlüssen. An die beiden IN-Anschlüsse rechts können Sie Alarmgeber anschließen, z. B. Bewegungsmelder oder sonstige alarmge- bende Geräte. Werden die IN-Anschlüsse extern miteinander verbunden, so wird ein Alarm ausgelöst. Dabei kann die Verbindung über einen Schalter bzw. Relais stattfinden. IUK 5 A1...
  • Page 62: Bedienung Und Betrieb

    ® ® Prozessor: 2.0 GHz oder höher RAM: 512 MB oder mehr Netzwerk-Karte: 10MBit/s oder besser Grafikkartenspeicher: 512 MB oder mehr Unterstützte Web-Browser: Internet Explorer 11, diverse andere mit reduziertem Funktionsumfang Bildschirmauflösung: 1024 × 768 oder höher IUK 5 A1...
  • Page 63: Inbetriebnahme

    Datei „Search Tool“. Dies startet das Programm zur Suche der Kamera im Netzwerk (keine Installation von Dateien auf Ihrem Computer). 1) Je nach Konfi guration des Rechners erscheint eine Firewall-Warnung: Klicken Sie auf „Zugriff zulassen“. IUK 5 A1...
  • Page 64 Geben Sie nun die Netzwerkdaten für die IP-Überwachungskamera manuell ein. Diese Daten erhalten Sie in der Regel über die Netzwerkeinstellungen des Routers. Für weitere Informationen lesen Sie die Bedienungsanleitung Ihres Routers. Klicken Sie auf „Apply“, um die geänderten Einstellungen zu übernehmen. IUK 5 A1...
  • Page 65: Kamerabild Im Browser „Internet Explorer 11" Darstellen

    Dann klicken Sie auf „Upgrade“, um die gewünschte Aktualisierung durchzuführen. Kamerabild im Browser „Internet Explorer 11“ darstellen HINWEIS ► Nur bei Verwendung des Browsers „Internet Explorer 11“ steht Ihnen die gesamte Funktionalität der IP-Überwachungskamera zur Verfügung. IUK 5 A1...
  • Page 66 3) Dann klicken Sie zunächst auf „OCX Download“, um ein notwendiges Plugin zu installieren: Wählen Sie „Speichern“, kurz darauf erscheint die Anzeigeleiste am unteren Bildrand. Hier klicken Sie „Öff nen“. Ein Explorer-Fenster öff net sich. Klicken Sie dort doppelt auf die Datei„oPlayer.msi“ und folgen den Bildschirmanweisungen zur Installation des Plugins. IUK 5 A1...
  • Page 67 5) Wählen Sie den Reiter „Sicherheit“ aus, markieren Sie „Vertrauenswürdige Sites“ und klicken auf „Sites“: 6) Im nächsten Fenster wird Ihnen angeboten, die Kameraadresse zu den vertrauenswürdigen Seiten hinzuzufügen: Entfernen Sie den Haken für die „Serverüberprüfung“, klicken Sie auf „Hinzufügen“, dann auf „Schließen“ und dann auf „OK“. IUK 5 A1...
  • Page 68: Bedeutung Der Steuertasten Und -Felder

    Wenn Sie Horizontal- und Vertikalschwenk aktivieren, vollzieht die Kamera einen kontinuierlichen Diagonalschwenk. −> Klicken Sie auf diese Schaltfl äche, um die Kamera bei Dunkelheit in den Infrarot-Modus zu schalten. Die Infrarot-LEDs erleuchten dann das nähere Umfeld der Kamera mit für den Menschen unsichtbarem Infrarot-Licht. IUK 5 A1...
  • Page 69 Zahlenfeld aus. Um die Kamera auf zuvor gespeicherte Positionen schwenken zu lassen, klicken Sie auf „Voreingestellte Position aufrufen“ und wählen die Nummer 1 – 16 für die gewünschte Position mit der Maus aus dem dann erscheinenden Zahlenfeld aus. IUK 5 A1...
  • Page 70 −> Klicken Sie auf diese Schaltfl äche, um einen Schnappschuss des aktuellen Kamerabil- des als Bitmap auf dem Computer zu speichern. −> Klicken Sie auf diese Schaltfl äche, um die im Folgenden beschriebene Konfi guration über das Browser-Interface zu öff nen. IUK 5 A1...
  • Page 71: Konfiguration Über Das Browser-Interface

    Gerätename Hier können Sie der Kamera einen anderen Namen geben, um sie im Netz ggf. besser identifizieren zu können. Maximal können 24 Zeichen verwendet werden. Ausgenommen sind Leerzeichen, andern- falls wird der neu vergebene Name nicht übernommen. IUK 5 A1...
  • Page 72 Speicherplatz für Videoaufzeichnungen reserviert bleibt, also nicht von anderen Applikationen belegt werden kann. Wenn bei Erreichen der Speicherplatzgrenze zuvor aufgenommene Videos gelöscht werden sollen, setzen Sie das Häkchen bei „Vorhandene Video-Dateien überschreiben“. Andernfalls werden keine neuen Videos mehr gespeichert. IUK 5 A1...
  • Page 73: Die Seite „Alarm

    Sie in der Auswahlbox dieses Menüpunktes die gewünschte zuvor abgespeicherte Position. Wenn Sie das Häkchen bei „Bei Alarm externe Sirene auslösen“ setzen, erscheint eine zusätzliche Zeile „Ausgabe Level“, in deren Auswahlbox Sie diesen Pegel als „Hoch“ oder „Gering“ festlegen können. IUK 5 A1...
  • Page 74 Einstellungen Ihres E-Mail-Providers. Wenn der E-Mail-Versand mit Authentifi zierung durchgeführt werden muss, setzen Sie das Häkchen bei „Benötige Authentifi kation“. Dann erscheinen die zusätzlichen Zeilen „SMTP Benutzer“ und „SMTP Passwort“. Tragen Sie hier die benötigten SMTP-Informationen Ihres E-Mail-Providers ein. IUK 5 A1...
  • Page 75 Unter „Upload Intervall (Sekunden)“ können Sie dann in Sekunden eingeben, in welchem Intervall bei Alarmauslösung Bilder zum FTP-Server hochgeladen werden sollen. Nachdem Sie die Einstellungen vervollständigt haben, können Sie die FTP-Verbindung mit einem Klick auf „Testen“ überprüfen. Alarm Protokoll Hier können Sie die Alarm-Log-Datei einsehen. IUK 5 A1...
  • Page 76: Die Seite „Netzwerk

    Geben Sie hier die IP-Adresse des zweiten DNS-Servers ein, der benutzt wird, wenn der erste DNS-Server ausfällt oder nicht erreichbar ist. Http Port Tragen Sie hier die Zahl 81 ein. Andernfalls funktioniert die Übertragung des Kamerabildes zum Computer nicht. IUK 5 A1...
  • Page 77: Die Seite „Steuerungs Einstellungen

    Auswahl. Anzahl der Patrouillen: Hier wird die Anzahl (1 - 10) der horizontalen bzw. vertikalen Schwenks ein- gestellt. Diese werden durchgeführt, wenn die entsprechende Funktion im Hauptbildschirm aktiviert wird. Mit der Einstellung „Immer“ werden dauerhaft Schwenks durchgeführt. IUK 5 A1...
  • Page 78: Die Seite „Benutzer Einstellungen

    ■ Klicken Sie anschließend auf den Namen der Kamera in der oberen Geräte-Liste, die Sie zuweisen wollen. Die benötigten Informationen werden automatisch übernommen. ■ Geben Sie den Benutzernamen und das Passwort ein und klicken Sie auf „Hinzufügen“. IUK 5 A1...
  • Page 79 HINWEIS ► Die Darstellung des Kamerabildes sowie die Gerätekonfiguration sind auch über andere Internet-Browser möglich, allerdings stehen dann ggf. nicht alle für den Internet Explorer 11 beschriebenen Optionen zur Verfügung. IUK 5 A1...
  • Page 80: Abweichende Bedienung Bei Verwendung Der Smartphone-Vorschau

    Tippen Sie auf den Eintrag, um das Kamerabild auf dem Smartphone-Bildschirm zu sehen. ♦ Wischen Sie mit den Fingern über das Display, um den Kamerakopf in die entsprechende Richtung schwenken zu lassen. HINWEIS ► Die Steuerung über das Webinterface bleibt von der Smartphone-Steuerung unbeeinfl usst. IUK 5 A1...
  • Page 81: Kamera Über Smartphone Steuern

    Schwenk anzuhalten, bzw. dann wieder fortzusetzen. −> Berühren Sie diese Schaltfl äche, um die Displayanzeige um 90° zu drehen. −> Berühren Sie diese Schaltfl äche, um die Audioübertragung zwischen Kamera und Handy ein- oder auszuschalten. IUK 5 A1...
  • Page 82 Berühren Sie diese Schaltfl äche, um die Einstellungen für Helligkeit und Kontrast wie- der auf die Werkseinstellungen zurückzusetzen. −> Berühren Sie diese Schaltfl äche, um die Infrarot-LEDs der Kamera ein- oder auszu- schalten. −> Berühren Sie diese Schaltfl äche, um die Anzeige des Kamerabildes zu beenden. IUK 5 A1...
  • Page 83: Zentrales Monitoring Über Spezielle Software

    Zulassungsanfrage der Benutzerkontensteuerung des Betriebssystems. Anschließend starten Sie das Programm „IUK Viewer“ und bestätigen beim ersten Starten des Programms ggf. die Zulassungsanfrage der Firewall des Betriebssystems. Unten links im Programm- fenster erscheint die Liste der installierten Kameras. IUK 5 A1...
  • Page 84 Web-Interface beschrieben wurden. Daher erfolgt hier keine erneute detaillierte Beschreibung. Konfigurieren Sie die gezeigten Parameter wie gewünscht, anschließend klicken Sie auf die Schalt- fläche „OK“. Sie können dieses Fenster auch durch einen Klick auf „System Einstellungen“ im linken Teil des Hauptfensters öffnen. IUK 5 A1...
  • Page 85 Sie können dieses Fenster auch durch einen Klick auf „Geräte Einstellungen“ im linken Teil des Hauptfensters öffnen. Klicken Sie auf „Hinzufügen“, wenn Sie in folgendem Fenster eine Kamera durch Eingabe der Anschlussdetails manuell hinzufügen wollen. Nach Abschluss der Eingaben klicken Sie auf „OK“, um das Fenster zu schließen. IUK 5 A1...
  • Page 86 Doppelklick auf die Kamera in die Liste übernommen werden. Eine Kamera kann auch mehrfach installiert werden. Die Geräteliste kann auch durch einen Klick auf „Geräte Einstellungen“ im linken Teil des Hauptfensters geöffnet werden. IUK 5 A1...
  • Page 87 Steuerung über einen Web-Browser. Bei Verwendung mehrerer Kameras müssen Sie zunächst mit der Maus einmal auf das Bild der Kamera klicken, die Sie steuern wollen. Das so aktivierte Bild wird rot umrandet dargestellt. IUK 5 A1...
  • Page 88: Reinigung

    Beachten Sie die folgenden Sicherheitshinweise, um Gefahren und Sachschäden zu vermeiden: ► Reparaturen an Elektrogeräten dürfen nur von Fachleuten durchgeführt werden, die vom Her- steller geschult sind. Durch unsachgemäße Reparaturen können erhebliche Gefahren für den Benutzer und Schäden am Gerät entstehen. IUK 5 A1...
  • Page 89: Ch Fehlerursachen Und -Behebung

    Drücken Sie mit einem schmalen spitzen Gegenstand reagiert nicht. vorsichtig den Reset-Schalter durch die Öffnung auf der Geräteunterseite. HINWEIS ► Wenn Sie mit den vorstehend genannten Schritten das Problem nicht lösen können, wenden Sie sich bitte an den Kundendienst. IUK 5 A1...
  • Page 90: Anhang

    Vertikal: 105°, Horizontal: 355° Min. Beleuchtung 2,0 Lux @ 500 nm Betriebstemperatur 5 bis +40°C Lagertemperatur −10 bis +60°C Feuchtigkeit (keine Kondensation) 5 bis 75 % Maße ca. 11,8 x 10,3 x 12,9 cm Gewicht ca. 300 g IUK 5 A1...
  • Page 91: Garantie

    Gewährleistung nicht verlängert. Dies gilt auch für ersetzte und reparierte Teile. Eventuell schon beim Kauf vorhandene Schäden und Mängel müssen sofort nach dem Auspacken gemeldet werden, spätestens aber zwei Tage nach Kaufdatum. Nach Ablauf der Garantiezeit anfallende Reparaturen sind kostenpflichtig. IUK 5 A1...
  • Page 92: Service

    Service Schweiz Tel.: 0842 665566 (0,08 CHF/Min., Mobilfunk max. 0,40 CHF/Min.) E-Mail: kompernass@lidl.ch IAN 48807 Erreichbarkeit Hotline: Montag bis Freitag von 8:00 Uhr – 20:00 Uhr (MEZ) Importeur KOMPERNASS HANDELS GMBH BURGSTRASSE 21 44867 BOCHUM GERMANY www.kompernass.com IUK 5 A1...
  • Page 93 KOMPERNASS HANDELS GMBH BURGSTRASSE 21 44867 BOCHUM DEUTSCHLAND / GERMANY www.kompernass.com Last Information Update · Stand der Informationen: 04 / 2015 · Ident.-No.: IUK5A1-012015-4 IAN 48807...

Table of Contents