Mercedes-Benz E-Class Coupe 2021 Operator's Manual page 58

Table of Contents

Advertisement

56
Occupant safety
Hold the seat belt tongue and guide back to
#
the seat belt outlet.
Installing a LATCH-type (ISOFIX) child
restraint system on the rear seat
Installing a LATCH-type (ISOFIX) child
restraint system on the rear seat
& WARNING Risk of accident if the rear
bench seat, rear seat and seat backrest
are not engaged
The rear bench seat, rear seat and seat back‐
rest may fold forwards, even when you are
driving.
As a result, the vehicle occupant will be
R
pushed into the seat belt with increased
force. The seat belt will not be able to
protect as intended and could cause
additional injury.
Objects or loads in the trunk or cargo
R
compartment will not be restrained by
the seat backrest.
Make sure that the rear bench seat, the
#
rear seat and the seat backrest are
engaged before every trip.
If the left and right seat backrests are not
engaged and locked in place, this will be shown
on the multifunction display on the instrument
cluster.
If the center seat backrest is not engaged and
locked in place, the red lock verification indica‐
tor will be visible.
& WARNING Risk of injury or death if the
permissible gross mass of the child and
child restraint system is exceeded
The LATCH-type (ISOFIX) child seat securing
systems may be overloaded and the child
may not be restrained in the event of an acci‐
dent, for example.
If the child and the child restraint sys‐
#
tem together weigh more than the per‐
missible gross mass of 73 lb (33 kg),
use only a LATCH-type (ISOFIX) child
restraint system that secures the child
with the vehicle seat belt.
Also secure the child restraint system
#
with the Top Tether belt, if available.
Always comply with the information about the
mass of the child restraint system:
In the manufacturer's installation and operat‐
R
ing instructions for the child restraint system
used
On a label on the child restraint system, if
R
present
Regularly check that the permissible gross mass
of the child and child restraint system is still
complied with.
When installing a child restraint system, observe
the following:
O Always observe the correct use of the seats
and consider their suitability for attaching a
child restraint system.
O Always comply with the manufacturer's
installation and operating instructions for
the child restraint system used.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents