Mercedes-Benz E-Class Coupe 2021 Operator's Manual page 186

Table of Contents

Advertisement

184 Driving and parking
The speed adaptation made by the system may
not always be suitable, particularly in the follow‐
ing situations:
The road's course not clearly visible
R
Road narrowing
R
Varying maximum permissible speeds in indi‐
R
vidual lanes
Wet road surfaces, snow or ice
R
In these situations the driver must intervene
accordingly.
& WARNING Risk of accident in spite of
route-based speed adaptation
Route-based speed adaptation can malfunc‐
tion or be temporarily unavailable in the fol‐
lowing situations:
If the driver does not follow the calcula‐
R
ted route
If map data is not up-to-date or available
R
In the event of roadworks
R
In bad weather or road conditions
R
If the accelerator pedal is depressed
R
In the event of electronically displayed
R
speed limitations
Adapt the speed to the traffic situation.
#
Setting route-based speed adaptation
Requirements:
Active Distance Assist DISTRONIC is activa‐
R
ted.
ECO Assist is active.
R
Multimedia system:
©
Settings
Assistance
4
5
5
Route-based Speed
5
Activate or deactivate the function.
#
When the function is active, the vehicle
speed is adjusted depending on the route
events ahead.
%
Further information on the route-based
speed adaptation (
page 183).
/
Function of Active Stop-and-Go Assist
Active Stop-and-Go Assist helps you when in
traffic jams on multi-lane roads with separate
roadways by automatically pulling away within
60 seconds and with moderate steering maneu‐
vers. It orients itself using the vehicle in front
and lane markings. Active Stop-and-Go Assist
automatically maintains a safe distance from the
vehicle in front and vehicles cutting in.
Active Stop-and-Go Assist requires you, as the
driver, to keep your hands on the steering wheel
at all times so that you are able to intervene at
any time to correct the course of the vehicle and
keep it in lane. Observe the notes on driving sys‐
tems and your responsibility; you may otherwise
fail to recognize dangers (
page 167).
/
Active Stop-and-Go Assist activates automati‐
cally as soon as all of the requirements are met:
The ¬ status display appears in the instru‐
ment cluster when the function is active.
Requirements:
You are in a traffic jam on a freeway or high-
R
speed major road.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents