Mercedes-Benz E-Class Coupe 2021 Operator's Manual page 333

Position support 2 of jack 4
#
port point 1.
Turn ratchet 3 clockwise until support
#
sits completely on jack support point
the base of the jack lies evenly on the
ground.
Turn ratchet 3 until the tire is raised a maxi‐
#
mum of 1.2 in (3 cm) from the ground.
Loosen and remove the wheel (
/
#
Removing a wheel
Requirements:
The vehicle is raised (
R
* NOTE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognize
dangers.
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
on jack sup‐
Do not place wheel bolts in sand or on
#
a dirty surface.
2
1 and
Unscrew the uppermost wheel bolt com‐
#
pletely.
page 331).
page 329).
/
Screw alignment bolt
#
instead of the wheel bolt.
Unscrew the remaining wheel bolts com‐
#
pletely.
Remove the wheel.
#
Mounting a new wheel
* NOTE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognize
dangers.
Wheels and tires 331
1 into the thread