Mercedes-Benz E-Class Coupe 2021 Operator's Manual page 212

210 Driving and parking
1
Guide line of external vehicle dimensions
with outside mirrors folded out
2
Marker of the wheel contact points
System limits
If the system is not ready for operation, the
tem Inoperative message appears in the media
display.
The surround view camera will not function or
will only partially function in the following situa‐
tions:
You are driving forwards at a speed greater
R
than approximately 10 mph (16 km/h).
The doors are open.
R
An outside mirror is not completely folded
R
out.
The trunk lid is open.
R
The weather conditions are poor, e.g. heavy
R
rain, snow, fog, storm or spray.
The ambient light conditions are poor, e.g. at
R
night.
The camera lens is obstructed, dirty or fog‐
R
ged up.
If cameras or vehicle components in which
R
the cameras are installed are damaged. In
this event, have the cameras, their positions
and their setting checked at a qualified spe‐
cialist workshop.
Sys-
% Do not use the surround view camera under
such circumstances. You could otherwise
injure others or collide with objects when
parking the vehicle.
For technical reasons, the standard height of the
vehicle may be altered if the vehicle is carrying a
heavy load and can result in inaccuracies in the
guide lines and in the display of the generated
images.
The field of vision and other functions of the
camera system may be restricted due to addi‐
tional attachments on the vehicle (e.g. license
plate bracket, bicycle rack).
% The contrast of the display may be impaired
by abrupt, direct sunlight or by other light
sources, e.g. when driving out of a garage. In
this case, pay particular attention.
% Have the display repaired or replaced if, for
example, pixel errors considerably restrict its
use.
See the notes on cleaning the surround view
camera ( page 280).
/
Calling up the view of the surround view
camera using reverse gear
Shift to reverse gear.
#
Select the desired view in the multimedia
#
system ( page 207).
/
If, after shifting to reverse gear, the image of
#
the rear view camera is not shown: switch off
the ignition, press and hold the c button,
switch on the ignition and engage reverse
gear again.