Taws Audio Check (For Units With Taws Only) - Garmin GTN 725 Installation Manual
Hide thumbs
Also See for GTN 725:
- Pilot's manual (554 pages) ,
- Cockpit reference manual (112 pages) ,
- Reference manual (110 pages)
Table of Contents
Advertisement
5.5.6
TAWS Audio Check (For Units with TAWS Only)
The audio panel should also be turned on for this test.
The TAWS audio volume has an initial default of 80% of the maximum volume value. The TAWS
volume needs to be set so as to ensure that aural alerts are audible under all anticipated noise
environmental conditions.
1. Touch the Audio configuration page from the GTN Setup
page. See Figure 5-19.
2. Next to 'Alert Audio', increase or decrease the volume by
touching the '+' or '-' button.
3. Evaluate the TAWS audio messages for acceptable
volume and intelligibility during both low and high
cockpit noise levels (idle descent at low speed and high
power at Vmo).
4. Readjust the Volume as needed to ensure the TAWS
audio messages will be heard in all anticipated cockpit
noise conditions.
GTN 725/750 TSO Installation Manual
190-01007-02
NOTE
Figure 5-19. GTN Audio
Configuration Page
Page 5-19
Rev. A
Advertisement
Table of Contents
