Table of Contents
Advertisement
memory card using the Garmin Express app
Software on a Memory Card Using Garmin Express, page
1
Turn on the chartplotter.
2
After the home screen appears, insert the memory card into
the card slot.
NOTE: In order for the software update instructions to
appear, the device must be fully booted before the card is
inserted.
3
Select Update Software > Yes.
4
Wait several minutes while the software update process
completes.
5
When prompted, leave the memory card in place, and restart
the chartplotter.
6
Remove the memory card.
NOTE: If the memory card is removed before the device
restarts fully, the software update is not complete.
NMEA 0183 with Audio Cable Pinout
The NMEA 0183 with audio cable (010-12852-00 or
010-12390-21) includes bare wires and an RCA connector for
an audio out connection to a stereo, including Fusion stereos.
You can purchase this cable from
Garmin dealer.
After installing the cable, you can connect the RCA connectors
to the AUX input of the stereo. The HDMI input is then output to
the stereo.
The cable also provides NMEA 0183 inputs and outputs.
Model
Accessory Part
Number
10 inch
010-12852-00
12 inch
010-12852-00
16 inch
010-12852-00
17 inch
010-12390-21
22 inch
010-12390-21
24 inch
010-12390-21
8700 black
010-12390-21
box
(included)
Touchscreen Controls for a Connected
Computer (MFD models)
To prevent corrosion due to moisture, you must use Garmin
GPSMAP accessory cables when connecting the chartplotter to
the computer. Using different cables voids your warranty.
You can connect the chartplotter to a computer to see the
computer screen on the chartplotter touchscreen and control the
computer using the chartplotter touchscreen. To see the
computer screen, you must connect the computer to the HDMI
IN port. To control the computer, you must connect the
computer to the USB port.
The Garmin HDMI accessory cable (010-12390-20) is 4.5 m
(15 ft) long. If you need a longer cable, you should use an active
HDMI cable only. You need an HDMI coupler to connect the two
HDMI cables.
The Garmin USB accessory cable (010-12390-10) is 4.5 m
(15 ft) long. If you need a longer cable, you should use a USB
hub or USB repeater extension cable only.
You must make all cable connections in a dry environment.
68
(Loading the New
garmin.com
or your local
NMEA 0183 Inputs and Outputs
One differential input and output
port
One differential input and output
port
One differential input and output
port
Four input ports and two output
ports
Four input ports and two output
ports
Four input ports and two output
ports
Four input ports and two output
ports
NOTICE
67).
Devices
Item
Device
Computer
GPSMAP chartplotter
Connections
From
Computer's HDMI OUT
port
Chartplotter's USB port
Touchscreen Controls for a Connected
Computer (8700 Model)
To prevent corrosion due to moisture, you must use Garmin
GPSMAP accessory cables when connecting the chartplotter to
the computer. Using different cables voids your warranty.
You can connect the chartplotter to a computer to see the
computer screen and to control the computer using a
touchscreen. To see the computer screen, you must connect the
computer to the HDMI IN port and connect the touchscreen to
the HDMI OUT port. To control the computer using the
chartplotter touchscreen, you must connect the computer to the
USB OTG port and connect the touchscreen to the USB HOST
port.
The HDMI Cable (010-12390-20) is 4.5 m (15 ft) long. If you
need a longer cable, you should use an active HDMI cable only.
You need an HDMI coupler to connect the two HDMI cables.
The Garmin OTG Adapter Cable (010-12390-11) is 1.8 m (6 ft)
long and the Garmin USB Cable (010-12390-10) is 4.5 m (15 ft)
long. If you need a longer cable, you should use a USB hub or
USB repeater extension cable only.
You must make all cable connections in a dry environment.
Devices
Item
Device
Computer
GPSMAP chartplotter
Touchscreen monitor
To
Cable
Garmin HDMI
Cable
Chartplotter's HDMI IN
port
Garmin USB
Cable
Computer's USB port
NOTICE
Appendix
Advertisement
Table of Contents
