Garmin GTN 725 Installation Manual page 60

Label #
321 Drift Angle
326G [1] Lateral Scale Factor
327G Vertical Scale Factor
330 Conic Arc Inbound Course
331 Conic Arc Radius
332 Conic Arc Course Change Angle
333 Airport Runway Azimuth
334 Airport Runway Length in Feet
335 Left/Right Hand Holding Pattern Azimuth
340 Left/Right Hand Procedure Turn Azimuth
351G Distance to Destination (Via Flight Plan)
352G Estimated Time to Destination (Via Flight Plan)
371G Specific Equipment ID
377 Equipment Hex ID Code
[1] Label 116G and 326G utilize the optional resolution extension bits (bits 11-13).
The following labels are output on the VOR/ILS ARINC 429 OUT port:
Label #
The labels recognized on the ARINC 429 IN ports depend on the configuration (see Section TBD).
4.3.4.1.3 ARINC 453/708
The GTN can receive ARINC 453/708 weather radar data from specific weather radars. For more
information, refer to Section TBD.
Page 4-12
Rev. A
Parameter Name
034G VOR/ILS Frequency (BCD)
035G DME Frequency (BCD)
100G Selected Course #1
173 Localizer Deviation
174 Glideslope Deviation
222 VOR Omnibearing
371G Specific Equipment ID
377 Equipment Hex ID Code
1 2 3 4 5 6 7
● ● ● ● ● ● ●
● ● ● ● ● ●
● ● ● ● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ● ● ● ● ●
● ● ● ● ● ●
● ● ● ● ● ●
● ● ● ● ● ● ●
Parameter Name
GTN 725/750 TSO Installation Manual
190-01007-02