Main Arinc 429 Config Page - Garmin GTN 725 Installation Manual

5.4.1

Main ARINC 429 Config Page

Access the GTN Setup page from the Configuration home page by touching the 'GTN Setup' button.
Figure 5-2. Main GTN Setup Page
To access the ARINC 429 Configuration page, touch the ARINC 429 button. This page configures the
four ARINC 429 input ports and the three ARINC 429 output ports. Select the correct speed for each port
depending upon the installed interfaced equipment by touching the speed button and toggling the high or
low selection.
Select the correct Data In and Data Out settings for each port. Touch the UP or DOWN button to scroll
through the ARINC selections. The data selections are described below.
Figure 5-3. Main ARINC 420 Configuration Page
GTN 725/750 TSO Installation Manual Page 5-3
190-01007-02 Rev. A