Table of Contents
Advertisement
Caution
To avoid damaging the tester or cables under
test, to avoid data loss, and to ensure maximum
accuracy of test results:
•
Leave the module bay covers in place when the
fiber modules are not installed.
•
Turn off the tester before attaching or removing
modules.
•
When using the fiber modules, use proper
cleaning procedures to clean all fiber connectors
before every use. Neglecting this step or using
improper procedures can cause unreliable test
results and may permanently damage the
connectors.
•
Use a Fluke Networks FiberInspector Video
Microscope to periodically inspect the fiber
module's OUTPUT connector for scratches and
other damage.
•
Do not use a video microscope to inspect the
fiber module's INPUT connector. This connector
has different dimensions than the OUTPUT
connector, and may be damaged by a fiber
inspection probe.
Safety Information
5
Advertisement
Table of Contents
