Cutting The Media After Printing Only White Data Or Cmyk Color Data - Roland SC-545EXW Manual

1-3 Cutting the Media After Printing

Cutting the Media After Printing Only White Data or CMYK Color Data

Perform the same operations under "Printing Only White Data" (page 16) or "Printing Only CMYK Color Data" (page
17), except for the following changes.
G In step 2
, draw the contour lines in the image you want to print, and then save the image as the PS file with the
contour lines data included.
G Perform the following operations instead of step
❶
In the job list, double-click the PS file that you want to use for printing and cutting.
❷
In the [Job Settings] dialog box that appears, make the following settings.
Icon
Cut Controls
❸
Click
Cutting starts automatically after printing and dry-out operations are complete.
20
Setup item
Operation Mode
to start printing.
6
.
Setting
Print & Cut