Table of Contents
Advertisement
Available Printing Modes
Each time you perform a single print operation (that is, a single print job) is performed using Roland VersaWorks, an
appropriate "printing mode" must be selected in accordance with the method you take, which is described on the last
page, and the type of ink (CMYK or white) you use.
There are the following six available printing modes:
Printing Mode
CMYK (v)
CMYK (v) onWhite W-PASS
CMYK (v) onWhite
CMYK (v) underWhite W-PASS
CMYK (v) underWhite
White (v) W-PASS
Note
You may select "CMYK (v) onWhite" instead of "CMYK (v) onWhite W-PASS", or "CMYK (v) underWhite" instead of
"CMYK (v) underWhite W-PASS" as necessary, when you want to save printing time. Note, however, that the quality of
the printed image may be slightly reduced. In this guide, all the relevant operations are explained as selecting "CMYK
(v) onWhite W-PASS" or "CMYK (v) underWhite W-PASS".
1-1 Transparent Media Print Overview
Description
Select this mode when you print using only CMYK ink.
Select one of these modes when you print using CMYK ink
with "CMYK-on-white method". The difference is that the
"CMYK (v) onWhite W-PASS" mode is better in image quality,
and the "CMYK (v) onWhite" mode prints faster.
Select one of these modes when you print using CMYK ink
with "CMYK-under-white method". The difference is that the
"CMYK (v) underWhite W-PASS" mode is better in image
quality, and the "CMYK (v) underWhite" mode prints faster.
Select this mode when you print using white ink. This mode
is available regardless of using only white ink or using white
ink in combination with CMYK ink.
7
Advertisement
Table of Contents
