Table of Contents
Advertisement
To print the CMYK layer of the image (step
8.
Click
to start printing the file.
G After printing is complete, it takes approximately 15 minutes to dry out the media.
G When the media is dried out, it will return to the original position automatically, according to the settings you
4
made in step
through
Printing White Data
1.
Click the [Queue B] tab in the main window so that the title above the tab
changes to "Job List - Queue B".
2.
Hold down the PS file "label_white.ps", which you have created by following the
operations under "2-2 Creating Data for Printing" on page 23.
3.
Drag the file in the job list, and then drop it (release the mouse button).
The file "label_white.ps" appears in the Queue B Job List with it is highlighted.
Note
You can use the default settings stored in Queue B Properties as they are. Because of this, it's not necessary to open the
[Job Settings] dialog box here.
4.
Click
to start printing the file.
G After printing is complete, it takes approximately 15 minutes to dry out the media.
8
)
7
. This makes it possible to print white data on the media successively.
2-4 Making Job Settings and Printing the Image
35
Advertisement
Table of Contents
